Filamento GEMBIRD PLA-PLUS, verde, 1,75 mm, 1 kg

Gembird 3DP-PLA+1.75-02-G is a green Polylactic Acid (PLA) filament for FDM/FFF 3D printers. Supplied on a 1 kg spool with a nominal diameter of 1.75 mm, this PLA+ material is designed for general-purpose printing and is compatible with printers from any brand. The filament is RoHS certified and formulated to deliver consistent extrusion, good layer adhesion and a smooth surface finish for prototypes, models and functional parts.

Advantages

The filament combines the ease of PLA printing with improved mechanical properties characteristic of PLA+ formulations. Its consistent 1.75 mm diameter and uniform winding reduce the risk of jams and under-extrusion. The green colour provides good visual contrast for decorative parts and prototypes. RoHS certification indicates compliance with environmental safety limits for hazardous substances.

Suitable for

• Rapid prototyping and concept models
• Decorative objects, figurines and display pieces
• Functional parts with moderate mechanical requirements
• Educational projects and desktop 3D printing

Key specifications

• Material: Polylactic Acid (PLA+)
• Filament diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: Green
• Compatibility: Compatible with any brand of FDM/FFF 3D printer
• Certification: RoHS compliant
• Density (as provided): 0.00125 kg/m³

How to use

Load the 1.75 mm filament into the extruder of a compatible FDM/FFF 3D printer and set the nozzle and bed temperatures according to your printer and model. Typical nozzle temperatures for PLA-based filaments are in the lower to mid-range of common PLA settings; use a calibrated extrusion multiplier and print speed appropriate for the part geometry. Ensure proper filament path and spool mounting to avoid tangles, and allow printed parts to cool before removing them from the build plate to maintain dimensional accuracy and surface quality.

Recommendations

For best results, use a clean nozzle and a dry filament spool. Store unused filament in a sealed container with desiccant to prevent moisture uptake. Adjust retraction and cooling settings to minimise stringing and improve surface finish; consider a heated bed or adhesion aid for larger prints if necessary.