SO-DIMM 16 GB DDR4-2666 (2x 8 GB) kit dual, memoria RAM F4-2666C19D-16GRS, Ripjaws

The G.SKILL Ripjaws DDR4 SO-DIMM F4-2666C19D-16GRS is a 16 GB kit (2 x 8 GB) of 260-pin SO-DIMM memory operating at 2666 MHz with CL19 timing and 1.2 V nominal voltage. Designed for high-performance laptops and small form factor PCs, this DDR4 module offers improved data transfer rates and lower power consumption compared with previous generations, making it suitable for demanding multitasking and gaming applications.

Advantages

Manufactured with specially screened components selected through G.SKILL’s binning process and validated by thorough testing, this Ripjaws SO-DIMM kit provides reliable performance. Its SO-DIMM form factor is compact for laptops and NUC/small PCs, while operating voltages between 1.2 V (standard) and up to 1.35 V for tuned profiles reduce power draw and heat output. The module also includes Intel XMP 2.0 profiles for simplified performance tuning and is covered by G.SKILL’s limited lifetime warranty and technical support.

Suitable for

• High-performance laptops that support DDR4 SO-DIMM
• Compact desktops and NUC/small form factor PCs
• Gaming and multimedia applications requiring smooth multitasking
• Professional workloads like editing, coding, and virtual machines

Key specifications

• Brand: G.SKILL
• Model / MPN: F4-2666C19D-16GRS
• Capacity: 16 GB (2 x 8 GB)
• Memory type: DDR4
• Form factor: 260-pin SO-DIMM
• Frequency: 2666 MHz
• CAS latency: CL19
• Voltage: 1.2 V (profiles may use up to 1.35 V)
• EAN: 4713294220844

How to use

Power off the laptop or small form factor PC and disconnect it from power. Open the memory compartment according to the device manufacturer’s instructions. Align the 260-pin SO-DIMM module with the slot notch and insert at a slight angle, then press down until the retention clips engage. Reassemble the device and power it on. Verify the system recognizes the full 16 GB and the correct frequency in BIOS/UEFI or the operating system. If desired, enable the Intel XMP 2.0 profile in BIOS/UEFI to apply the tested performance settings.

Recommendations

Install memory modules in matched pairs for dual-channel operation and consult your device manual for supported memory speeds and maximum capacity. For stability, ensure BIOS/UEFI firmware is up to date before enabling XMP profiles.