GETFORT GF-124-24PG-2S-400 Switch Gigabit PoE+ de 24 puertos con 2 uplinks SFP, presupuesto 400W, Montaje en rack

Powering multiple IP cameras, wireless access points, and VoIP phones often requires separate power injectors and a tangle of cables. The GETFORT GF-124-24PG-2S-400 eliminates that clutter by delivering both data and power over a single Ethernet cable to up to 24 devices. With a total PoE budget of 400W and support for IEEE 802.3af/at, this unmanaged switch is ready for demanding surveillance and network expansion projects.

Who is it for

System integrators, small to medium businesses, and advanced home users who need a reliable, plug-and-play PoE switch for IP cameras, access points, and other powered devices. No configuration is required—just connect your devices and they receive power and network connectivity instantly.

Main features

• 24 Gigabit PoE+ ports (10/100/1000 Mbps) with up to 30W per port
• 2 Gigabit SFP uplink ports for fiber connectivity to a core network
• Total PoE power budget of 400W, enough for high-power devices
• Unmanaged operation—no setup needed, ideal for simple deployments
• Rack-mountable 1U metal housing with smart fan for quiet, reliable cooling
• Switching capacity of 52 Gbps and packet forwarding rate of 38.69 Mpps for smooth traffic

Specifications

• Ports: 24 x 10/100/1000 Mbps RJ45 PoE+, 2 x 1000 Mbps SFP
• PoE Standards: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
• PoE Power Budget: 400W total, up to 30W per port
• Switching Capacity: 52 Gbps
• Packet Forwarding Rate: 38.69 Mpps
• MAC Address Table: 8K entries
• Jumbo Frame Support: 9KB
• Network Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3af, 802.3at
• Power Supply: Internal AC, 100-240V AC, 50/60Hz
• Mounting: Rack-mountable (1U), metal housing
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Operating Humidity: 10% to 90% non-condensing
• LED Indicators: Power, Link/Act, PoE Status
• Fan: Smart Fan

Tips

To maximize the PoE budget, calculate the power requirements of your connected devices. Each port can deliver up to 30W, but the total across all ports cannot exceed 400W. For long-distance uplinks, use the SFP ports with compatible fiber modules to connect to a central switch without signal loss.