Guías pasacables c.k tools MightyRod PRO T5422 set de 12 m — set de varillas de fibra de vidrio para el tendido de cables en tubos y canales

c.k tools MightyRod PRO T5422 is a 12 m set of fiberglass cable pulling rods designed to assist electricians and installers in routing cables through ducts, conduits and trunking. The kit consists of modular sections that connect to form a continuous rod with a balance of stiffness and flexibility, enabling passage through straight runs and moderate bends while maintaining control and reducing the risk of damage to cables or ductwork.

Advantages

The fiberglass construction provides a non-conductive, corrosion-resistant tool that remains dimensionally stable across a range of temperatures. Modular connector design lets users assemble only the length required, improving portability and storage. The rods deliver a combination of rigidity for pushing and flexibility for negotiating bends, and their smooth outer surface reduces snags when feeding cables. The set reduces manual pulling force and helps maintain cable integrity during installation.

Suitable for

Key specifications

How to use

Assemble the required number of rod sections by firmly connecting the modular joints until the desired length is achieved. Insert the leading end into the duct or conduit and push gently, rotating if necessary to negotiate bends. Attach a pulling line, fish tape or cable to the leader using the recommended secure method for the cable type, then pull the cable back through the duct while supporting and guiding the rod to prevent snagging. Disassemble the sections after use and store the kit in a dry place to preserve the fiberglass integrity.

Recommendations

Inspect rod sections before use for cracks or damage; do not use if any section shows significant wear. Avoid excessive side-loading or twisting beyond the product’s intended bending capability. Use appropriate personal protective equipment and ensure the work area is de-energized when working near live circuits.