Medidor de señal de satélite Megasat SF 210 con indicador de intensidad y calidad de señal

Megasat SF 210 is a compact satellite signal meter that measures both signal strength and signal quality for DVB‑S and DVB‑S2 systems. It connects between the LNB and the receiver to assist with antenna alignment, fine‑tuning and checking signal stability during installation and maintenance.

Advantages

The device provides simultaneous indication of signal strength and signal quality, allowing precise alignment. Its portable design and simple inline connection between LNB and receiver make it practical for installers and hobbyists. The Megasat SF 210 supports DVB‑S/DVB‑S2 standards and helps verify reception without requiring the receiver to be connected during adjustments.

Suitable for

Key specifications

How to use

Disconnect the coaxial cable from the receiver, connect the Megasat SF 210 between the LNB and the receiver using the coaxial cables, then power the receiver or LNB as required. Observe the signal strength and quality indicators while adjusting the dish position until the desired readings are achieved. After alignment, remove the meter and reconnect the system for normal operation.

Recommendations

Perform adjustments during stable weather conditions and make small, incremental movements of the dish while watching both strength and quality indicators to find the optimal position. Verify results with the receiver after removing the meter.