Microconnect PEA1416 Cable de alimentación negro 0,3 m conector hembra C13 conector hembra C14

Microconnect PEA1416 is a 0.3 m power cable with a C13 connector on one end and an angled C14 coupler on the other. It is designed for devices that require a mains connection at up to 250 V and 10 A, and is supplied in black with a compact form factor suitable for short-distance connections between equipment.

Advantages

The cable provides a standardized IEC C13 to C14 connection for compatibility with many power supplies and equipment racks. Its short 0.3 m length reduces cable clutter and is useful where a direct, compact connection is needed. The angled C14 coupler allows for easier routing in tight spaces. Rated for 250 V and 10 A, it meets common mains power requirements for IT and electronic devices.

Suitable for

• Connecting servers, UPS units and network equipment with IEC C13/C14 sockets
• Short-distance power connections inside racks or between adjacent devices
• Situations requiring an angled inlet for better cable routing

Key specifications

• Connector 1: C13 coupler
• Connector 2: Angled C14 coupler
• Cable length: 0.3 m
• Voltage: 250 V
• Current: 10 A
• Colour: Black
• Weight: 0.08 kg

How to use

Insert the C13 connector into the device's IEC C13 inlet and connect the angled C14 coupler to the corresponding C14 outlet or power distribution unit. Ensure both ends are fully seated and that the cable is not under tension or pinched. Verify that the connected equipment's power rating does not exceed the cable's 250 V/10 A specification before use.

Recommendations

For reliable operation, avoid running the cable through sharp bends or tight pinch points and keep it away from heat sources. Use the short 0.3 m length to minimize excess cable inside racks; if longer runs are required, choose an appropriately longer certified IEC cable.