Módulo transceptor de cobre BlueOptics SFP-1GBT-09-BO 1250 Mbit/s RJ-45

The BlueOptics SFP-1GBT-09-BO is a copper SFP transceiver module designed for 1000BASE-T Ethernet links. It supports a maximum data transfer rate of 1250 Mbit/s and provides a standard RJ-45 interface for connection to copper twisted-pair cabling. The module is housed in a metal casing, operates at 3.3 V input voltage and has a compact, lightweight form factor, which simplifies installation into SFP ports of switches, routers and other network devices that follow MSA standards.

Advantages

The module offers compatibility with SFP-based network equipment that supports 1000BASE-T, delivering stable copper connectivity up to gigabit speeds. Its metal enclosure provides mechanical robustness and EMI shielding while the low weight and standard SFP form factor make it easy to hot-plug and replace. Designed and tested to meet industry MSA requirements, the transceiver is suitable for long-term deployment and integration into existing network infrastructures.

Suitable for

Key specifications

How to use

Insert the BlueOptics SFP-1GBT-09-BO into an empty SFP port on compatible network hardware until it latches. Connect a standard RJ-45 copper patch cable to the module and the remote device. Ensure the host device supports 1000BASE-T SFP copper modules and that software/firmware settings allow use of third-party transceivers. After insertion, verify link status and negotiated speed in the device management interface. Hot-plugging is supported by most SFP-compliant equipment, but follow the host manufacturer's guidance when installing or removing modules.

Recommendations

Use shielded or unshielded twisted-pair cabling appropriate for gigabit Ethernet (Cat5e or higher) and keep copper patch runs within recommended distance limits (typically up to 100 meters). When deploying in data centers or managed networks, verify firmware compatibility and perform link tests after installation to confirm stable operation.