Módulo transceptor de fibra óptica BlueOptics 10064-BO 1000 Mbit/s SFP 1550 nm

The BlueOptics 10064-BO is a fiber optic SFP transceiver module designed for 1000 Mbit/s gigabit connections. Operating at a wavelength of 1550 nm, this compact SFP form-factor module facilitates single-fiber or long-distance links depending on system configuration and compatible equipment. The transceiver is RoHS compliant and finished in a silver housing, suitable for rack-mounted and chassis-based networking hardware where standard SFP modules are required.

Advantages

The module supports a standard SFP interface for hot-swappable installation and broad compatibility with SFP-capable switches, routers and media converters. Its 1550 nm wavelength is commonly used for long-reach single-mode fiber links and helps maintain signal integrity over extended distances. The compact silver housing meets industry physical form-factor expectations and the unit's 1000 Mbit/s throughput provides a stable gigabit Ethernet connection in mixed network environments.

Suitable for

• Gigabit Ethernet uplinks between switches and routers
• Long-reach single-mode fiber connections
• Media converters and modular network equipment requiring SFP modules
• Data center interconnects and telecom access links

Key specifications

• Interface type: SFP form factor compatible with standard SFP slots
• Maximum data transfer rate: 1000 Mbit/s (1 Gbit/s)
• Wavelength: 1550 nm suitable for single-mode fiber applications
• Compliance: RoHS compliant
• Color: Silver housing

How to use

Install the BlueOptics 10064-BO into an available SFP port on a compatible switch, router or media converter while the device is powered on or off, following the host equipment manufacturer's hot-swap guidance. Connect the appropriate single-mode fiber cable terminated for 1550 nm operation to the module's optical interface, ensuring correct connector type and polarity. Configure the network device as required for gigabit operation and verify link status through the host diagnostics or LEDs.

Recommendations

Verify compatibility with the host device's supported SFP list and ensure fiber type and connector match the transceiver's wavelength characteristics. Avoid exposing the optical ports to dust; use protective caps when the module is not connected. Observe ESD precautions during handling and follow the networking equipment vendor's guidelines for firmware and link configuration.