Módulo transceptor de fibra óptica BlueOptics 2XJHY-BO QSFP MTP/MPO

The BlueOptics 2XJHY-BO QSFP MTP/MPO is a fiber optic transceiver module designed for 40 Gbps high-speed data transmission over single-mode fiber. Built in an aluminium housing and weighing approximately 40 g, this QSFP module uses an MTP/MPO connector and follows MSA-compatible form factor standards to provide reliable optical interconnects for network equipment that supports 40GBASE applications.

Advantages

The module delivers 40G data throughput with simultaneous transmit and receive channels via optical laser transmission, reducing susceptibility to electromagnetic interference and enabling longer-distance single-mode links. Its aluminium construction ensures mechanical durability while the QSFP interface supports compact, high-density installations. The MTP/MPO connector simplifies multi-fiber cabling for high-bandwidth links.

Suitable for

• 40 Gbps Ethernet interconnects between switches and routers
• High-speed links in data centers and server farms
• Optical uplinks for storage systems and aggregation equipment
• Environments requiring MTP/MPO multi-fiber connections

Key specifications

• Interface type: QSFP
• Connector: MTP/MPO
• Optical fiber type: single-mode fiber support
• Typical data rate: up to 40 Gbps
• Housing material: aluminium
• Weight: approximately 0.04 kg
• Typical maximum link distance: up to 10 km (application dependent)

How to use

Install the BlueOptics 2XJHY-BO QSFP MTP/MPO in a compatible QSFP slot of your network device, ensuring the host hardware supports 40G QSFP modules and the MTP/MPO connector type. Connect an appropriate single-mode MTP/MPO fiber patch cable to the module and the remote transceiver or patch panel. Verify link status via the host system ports and, if available, use the device management interface to confirm operational parameters.

Recommendations

For optimal performance, use single-mode MTP/MPO patch cords and ensure both ends of the optical link support the same 40G optical standard. Confirm that the host platform supports QSFP modules and any digital diagnostic monitoring features you plan to use. Handle the transceiver carefully to avoid contamination of the optical connector and follow standard ESD precautions during installation.