Módulo transceptor de fibra óptica BlueOptics 740-054050-BO 40000 Mbit/s QSFP

The BlueOptics 740-054050-BO is a QSFP fiber optic transceiver module designed for 40 Gbit/s network links. Its compact QSFP interface supports high-density port configurations and is suitable for use in switches, routers and optical equipment that accept QSFP modules. The module has a silver housing and a lightweight design of approximately 40 g, and its reported mean time between failures (MTBF) of 1,000,000 hours indicates suitability for continuous operation in data center and enterprise environments.

Advantages

This transceiver provides a standardized QSFP interface for easy hot-plug compatibility with devices that support QSFP modules. The 40 Gbit/s maximum data transfer rate enables use in high-throughput uplinks and aggregation links. The compact and lightweight construction simplifies installation in high-density racks, while the long MTBF supports reliable long-term operation with reduced maintenance needs.

Suitable for

• 40 Gbit/s uplinks between switches and routers
• Data center aggregation and spine-leaf network links
• High-speed connections in enterprise optical networks
• Equipment environments requiring QSFP form-factor transceivers

Key specifications

• Interface type: QSFP
• Maximum data transfer rate: 40000 Mbit/s
• Weight: 0.04 kg
• Product colour: Silver
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the module into a compatible QSFP slot on your network device following the device manufacturer's hot-plug procedure. Ensure the equipment is powered and that the slot supports a 40 Gbit/s QSFP transceiver. Connect appropriate fiber optic cables and verify link status through the device management interface. Observe ESD precautions when handling the module and keep optical connector dust caps in place until connection to avoid contamination.

Recommendations

Use this QSFP transceiver with compatible networking equipment that explicitly supports 40 Gbit/s QSFP modules. Match fiber type and connectors to the transceiver and the link distance requirements, and monitor optical power and link status after installation to confirm proper operation.