Módulo transceptor de fibra óptica BlueOptics AXM763-10000S-BO SFP+ 220m

The BlueOptics AXM763-10000S-BO SFP+ is a 10GBASE-LRM fiber optic transceiver module designed for high-speed optical data links over multimode fiber. Housed in an aluminium casing and weighing approximately 20 grams, this SFP+ module supports transmission distances up to 220 metres and uses an LC duplex connector. It implements a 1310 nm transmitter and receiver pair suitable for Ethernet and Fibre Channel over Ethernet applications at data rates up to 10 Gbps and follows MSA interoperability guidelines.

Advantages

The module offers compact SFP+ form-factor compatibility with hardware that supports 10GBASE-LRM SFP+ transceivers, enabling straightforward hot-plug installation. Its aluminium housing provides mechanical durability and thermal dissipation while keeping weight low. The transceiver supports digital diagnostics (DDM/DOM) compliant with SFF-8472 for real-time monitoring of supply voltage, laser bias current, optical output/input power and temperature when used in devices that support these functions. Designed and tested for interoperability, the unit uses components selected to meet industry MSA standards and is suitable as a functional equivalent to common 10G LRM modules.

Suitable for

Key specifications

How to use

Install the BlueOptics AXM763-10000S-BO into an SFP+ port of a compatible switch, router or storage device while the host is powered on or off according to the equipment manual. Connect LC duplex multimode fibre patch cords to the module’s LC ports, ensuring correct polarity and that the connected fibre type and the transceiver standard (10GBASE-LRM) match. Configure the host device network interfaces as required by your environment. If the host supports DDM/DOM, enable monitoring via the device management interface to view real-time diagnostic parameters for the optical link.

Recommendations

Use high-quality multimode LC patch cords and maintain clean fibre endfaces to achieve maximum range and signal quality. Verify that the target hardware explicitly supports 10GBASE-LRM SFP+ modules and DDM/DOM if diagnostics are required. For reliable long-term operation, operate within the temperature and power ranges specified by the host device and perform periodic optical inspections and cleaning.