Módulo transceptor SFP BlueOptics 30-1301-01-BO 1250 Mbit/s fibra óptica

The BlueOptics 30-1301-01-BO is an SFP fiber optic transceiver module designed for single-port network devices. It supports a maximum data transfer rate of 1250 Mbit/s and is provided in a compact SFP form factor with a silver housing. The module meets CE, FCC and RoHS conformity and is specified with a mean time between failures (MTBF) of 1,000,000 hours, making it suitable for standard fiber links in access and distribution networks.

Advantages

The SFP transceiver provides a compact, hot-pluggable interface compatible with SFP slots on switches and routers, enabling flexible uplink or fiber extension options. Its compliance with common regulatory standards ensures interoperability and reduced environmental impact, while the modest weight and standardized form factor simplify installation and equipment handling.

Suitable for (tasks / use cases)

• Establishing single-fiber or multimode fiber links between switches and routers
• Upgrading or replacing SFP ports in access layer and distribution devices
• Short- to medium-distance data transmission in campus and enterprise networks
• Spare or hot-swap transceiver for maintenance and fault recovery

Key specifications

• Form factor: SFP (small form-factor pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Housing colour: silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Regulatory conformity: CE, FCC, RoHS

How to use

Power down or enable hot-swap support on the host device according to the equipment manual, then insert the SFP transceiver into an available SFP slot until it seats securely. Connect the appropriate fiber optic cable to the module using the matching connector type on the network side. Configure link settings on the switch or router if required to enable the 1250 Mbit/s interface and verify link status through device LEDs or management software. For removal, follow the host device procedure to avoid damage to the transceiver or fiber cable.

Recommendations

Use compatible fiber cables and follow equipment manufacturer guidelines for connector types and polarity. Store and handle the transceiver in a clean, dry environment; protect the optical ports with dust caps when not in use. Verify compatibility with the host device before deployment and perform link tests after installation to confirm expected performance.