Módulo transceptor SFP+ BlueOptics 472949A.101-BO fibra óptica 10000 Mbit/s

The BlueOptics 472949A.101-BO is a fiber optic SFP+ transceiver module designed for 10 Gbit/s links. With an SFP+ form factor and a compact silver housing, this module supports a maximum data transfer rate of 10000 Mbit/s and is intended for integration into switches, routers and optical line cards that accept SFP+ modules. The transceiver is certified to CE, FCC and RoHS standards and has a stated MTBF of 1,000,000 hours, indicating suitability for long-term deployments where optical connectivity and compact form factor are required.

Advantages

The module delivers 10 Gbit/s-capable fiber connectivity in a standard SFP+ form factor, enabling high-density installations and easy hot-swap replacement. Its silver metal housing and 20 g weight provide a compact, lightweight solution for rack and chassis environments. Compliance with CE, FCC and RoHS standards ensures regulatory conformity and reduced risk in commercial and industrial network deployments. A high MTBF contributes to predictable operational lifetime and reduced maintenance frequency.

Suitable for

• 10 Gbit/s fiber uplinks between switches and aggregation devices
• High-density SFP+ ports in data center and rack-mounted equipment
• Optical connections in enterprise LAN and campus networks
• Replacement or upgrade of existing SFP+ transceivers

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Interface type: fiber optic SFP+
• Product colour: silver
• Weight: 0.02 kg
• Standards compliance: CE, FCC, RoHS
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Insert the BlueOptics SFP+ transceiver into a compatible SFP+ port until it latches, taking care to align the module with the port guide rails. Connect the appropriate fiber optic cable to the transceiver optical interface, ensuring correct connector type and polarity. After physical installation, verify link status on the host device and adjust interface settings as required by the switch or router. For hot-swap operation, follow the host equipment vendor’s procedures to avoid transient link or configuration issues.

Recommendations

Handle the transceiver by its housing, avoid touching the optical connector endface, and protect unused ports with dust caps. Use compatible multimode or singlemode fiber and connectors as required by your network design and verify compatibility with the host device’s SFP+ implementation before deployment.