Módulo transceptor SFP BlueOptics 55113107-BO 1250 Mbit/s fibra óptica

The BlueOptics 55113107-BO SFP transceiver module is a compact fiber optic interface designed for network devices that support SFP ports. Supporting a maximum data transfer rate of 1250 Mbit/s and compatible with 1.25 Gigabit Ethernet links, this silver-coloured module uses an LC fiber connector and is specified for single-module mean time between failures of 1,000,000 hours. Certified to CE, FCC and RoHS standards and weighing approximately 20 g, the unit is intended for installation in switches, routers or media converters to provide reliable fiber connectivity over long distances.

Advantages

The module combines a standardized SFP form factor with a small footprint and low weight, making it suitable for dense installations and easy field replacement. Its support for 1.25 Gigabit Ethernet and a specified maximum transfer distance of up to 40,000 m enables long-reach connections without intermediate active equipment. Compliance with CE, FCC and RoHS ensures conformity with common regulatory and environmental requirements, and the high MTBF indicates long operational life and reduced maintenance needs.

Suitable for

• Fiber uplinks between switches and routers in enterprise and carrier networks
• Long-distance point-to-point fiber connections
• Integration with media converters and optical line equipment
• Replacement or upgrade of existing SFP fiber interfaces

Key specifications

• Maximum data transfer rate: 1250 Mbit/s
• Interface: 1.25 Gigabit Ethernet (SFP form factor)
• Connector type: LC fiber optic connector
• Maximum transfer distance: up to 40,000 m (fiber-dependent)
• Product colour: Silver
• Weight: approx. 0.02 kg
• Certifications: CE, FCC, RoHS
• MTBF: 1,000,000 hours

How to use

Install the transceiver into a compatible SFP slot on a switch, router or media converter until the module latches. Connect LC-terminated fiber patch cables to the transmit and receive ports, ensuring correct polarity. Power on and configure the network device as required for a 1.25 Gbit/s link; most devices will auto-negotiate or allow manual port configuration. Monitor link status indicators on the host device and verify signal and error statistics through the device management interface.

Recommendations

Use single-mode fiber of appropriate attenuation and quality for long-reach links, and follow proper fiber handling and connector cleaning procedures. Verify compatibility with the host device and consult the device documentation for any required transceiver settings. Avoid excessive bending of fiber cables and protect transceiver ports from dust when not in use.