Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s

Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
54,38 €
The BlueOptics SFP-1G20ALC-T-BO is an SFP fiber-optic transceiver module designed for single-mode links with a maximum data transfer rate of 1250 Mbit/s. Housed in a metal enclosure and operating at 3.3 V, the compact module weighs approximately 3 g and uses an LC simplex-style optical interface fol... Leer más
Stock 29 Código 1483243 Marca BLUEOPTICS Modelo SFP-1G20ALC-T-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Lunes, Octubre 26
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics SFP-1G20ALC-T-BO is an SFP fiber-optic transceiver module designed for single-mode links with a maximum data transfer rate of 1250 Mbit/s. Housed in a metal enclosure and operating at 3.3 V, the compact module weighs approximately 3 g and uses an LC simplex-style optical interface following MSA form-factor standards. It supports 1000BASE-BX-U single-fiber transmission with separate transmit and receive wavelengths and is intended for integration into network equipment that accepts standard SFP modules.

Advantages

The transceiver provides gigabit-capable optical connectivity in a small SFP form factor, combining a metal housing for durability with a low operating voltage. It is built to MSA-compatible dimensions and optical interfaces, enabling broad interoperability with switches, routers and storage systems that accept SFP modules. The module’s single-mode optical design allows longer reach than typical multimode modules while maintaining resistance to electromagnetic interference inherent to fiber links.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP-1G20ALC-T-BO by inserting it into any compatible SFP slot on a switch, router or other network device while the device is powered according to the vendor’s guidance. Connect a single-mode LC simplex patch cable between transceivers, observing the correct fiber polarity for the single-fiber BX configuration (transmit wavelength on one end to receive wavelength on the other). Verify that the host device supports the required 1000BASE-BX-U protocol and, if available, enable digital diagnostic monitoring (DDM/DOM) in the device firmware to access real-time module parameters.

Recommendations

Ensure the host hardware supports single-fiber 1000BASE-BX-U operation and DDM if diagnostic telemetry is required; use quality single-mode LC simplex patch cords and adhere to proper handling procedures for fiber connectors to maintain link performance and minimize contamination or damage.
Aspectos destacados
  • Point-to-point single-mode fiber connections up to 20 km (1000BASE-BX-U use cases)
  • Gigabit Ethernet uplinks between switches and routers
  • Interconnects for routers, load balancers and storage systems with SFP ports
  • Environments requiring compact, low-power transceivers
  • Interface type: SFP (MSA compatible)
  • Maximum data rate: 1250 Mbit/s
  • Operating voltage: 3.3 V
  • Optical design: single-mode, LC simplex connector, separate TX/RX wavelengths (1000BASE-BX-U)
  • Housing material: metal (silver colour)
  • Weight: approx. 0.003 kg
Especificaciones
Cantidad por paquete
1 pc(s)
Color del producto
Silver
Conector de fibra óptica
SFP
Distancia máxima de transmisión
20000 m
Estándar de transceptor SFP
BX-U
Longitud de onda de recepción (máx.)
1490 nm
Longitud de onda de transmisión (máx.)
1310 nm
Material de la carcasa
Metal
Peso
0.003 kg
Peso del embalaje
2 g
Sistema dúplex
Full
Tecnología de cableado Ethernet de fibra
1000BASE
Temperatura de almacenamiento (T-T)
-40 - 85
Temperatura de funcionamiento (T-T)
0 - 70
Temperatura máxima de funcionamiento
70 °C
Temperatura mínima de funcionamiento
0 °C
Tensión de entrada
3.3
Tipo de interfaz
SFP
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
1250 Mbit/s
Historial de precios de los últimos 6 meses
Módulo transceptor SFP BlueOptics SFP-1G20ALC-T-BO 1250 Mbit/s
Actual
54,38 €
Mínimo
50,55 €
Máximo
59,94 €
Variación 24 h
+0,93 €   +2%
Semana
+0,85 €   +2%
Mes
-2,72 €   -5%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.