Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s

Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
65,46 €
The BlueOptics SFP-BXU34-40KM-HU-BO is a compact fiber optic SFP transceiver module that supports a maximum data transfer rate of 1250 Mbit/s. Encased in a durable metal housing with a silver finish, the module is lightweight at approximately 20 g and designed for long-term operation with a mean tim... Leer más
Stock 130 Código 1484711 Marca BLUEOPTICS Modelo SFP-BXU34-40KM-HU-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Martes, Octubre 27
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics SFP-BXU34-40KM-HU-BO is a compact fiber optic SFP transceiver module that supports a maximum data transfer rate of 1250 Mbit/s. Encased in a durable metal housing with a silver finish, the module is lightweight at approximately 20 g and designed for long-term operation with a mean time between failures (MTBF) of 1,000,000 hours. It provides a standard SFP interface for straightforward installation into compatible network equipment and is intended for single-mode fiber links over extended distances.

Advantages

The module offers a standardized SFP interface for hot-pluggable installation and interchangeability across devices that accept SFP transceivers. Its metal housing provides physical protection and thermal stability, while the low weight facilitates handling and mounting in dense installations. A high MTBF value indicates long-term reliability suitable for continuous network operation, and support for 1250 Mbit/s makes it compatible with typical Gigabit Ethernet and other serial fiber applications.

Suitable for

Key specifications

How to use

Ensure the host device supports SFP modules and that the fiber type and connector polarity match the transceiver’s requirements. Power down or follow the host device’s hot-swap procedure if applicable, then insert the transceiver into an available SFP slot until it clicks into place. Connect the appropriate single-mode fiber cable to the transceiver. Configure any required link settings on the network equipment (speed, duplex, or optical parameters) and verify link status through device indicators or management interfaces. Follow ESD precautions when handling the module and keep dust caps on unused ports.

Recommendations

Use single-mode fiber with compatible connectors and maintain proper fiber cleanliness for reliable optical performance. Install in equipment specified to accept SFP transceivers and verify firmware or compatibility notes from the equipment vendor if exact interoperability is critical.

Aspectos destacados
  • Single-mode fiber links in telecom and data center networks
  • Upgrading or replacing SFP ports in switches, routers and media converters
  • Point-to-point fiber connections over extended distances
  • Environments requiring compact, hot-pluggable transceiver modules
  • Interface type: SFP (small form-factor pluggable)
  • Maximum data transfer rate: 1250 Mbit/s
  • Housing: metal, silver colour
  • Weight: approximately 0.02 kg
  • Reliability: mean time between failures (MTBF) 1,000,000 hours
Especificaciones
Cantidad por paquete
1 pc(s)
Color del producto
Silver
Compatibilidad con conexión en caliente
Yes
Compatible con fibra monomodo (SMF)
Yes
Conector de fibra óptica
LC
Diámetros de fibra compatibles (núcleo/revestimiento)
9/125
Distancia máxima de transmisión
40000 m
Estándar de transceptor SFP
BX-U
Longitud de onda de recepción (máx.)
1490 nm
Longitud de onda de transmisión (máx.)
1310 nm
Material de la carcasa
Metal
Peso
0.02 kg
Peso del embalaje
30 g
Temperatura de funcionamiento (T-T)
0 - 70
Tiempo medio entre fallos (MTBF)
1000000 h
Tipo de interfaz
SFP
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
1250 Mbit/s
Historial de precios de los últimos 6 meses
Módulo transceptor SFP BlueOptics SFP-BXU34-40KM-HU-BO 1250 Mbit/s
Actual
65,46 €
Mínimo
64,58 €
Máximo
69,79 €
Variación 24 h
+0,63 €   +1%
Semana
+0,49 €   +1%
Mes
-1,91 €   -3%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.