Módulo transceptor SFP Telekom GPON B+ SC/APC, conector SC/APC monofibra

SFP Transceiver Module Telekom GPON B+ SC/APC, single-fiber SC/APC connector is a compact optical transceiver intended for gigabit-capable passive optical networks (GPON). Designed to fit standard SFP slots, the module provides a single-fiber SC/APC interface for upstream or downstream optical links and is compatible with fiber access equipment such as OLTs, ONTs and media converters. The module supports typical GPON wavelengths and optical power ranges used in FTTH deployments, enabling reliable fiber connectivity for access networks and uplinks.

Advantages

The Telekom GPON B+ SFP module offers a small form-factor design that simplifies installation in equipment with SFP ports. Its SC/APC single-fiber connector reduces the number of fibers required for bi-directional links and improves return loss due to the APC polish. The module is suitable for integration into existing GPON infrastructure and media conversion systems, providing stable optical performance within the B+ class operating parameters.

Suitable for

• FTTH access network uplinks and subscriber ports
• OLT and ONT devices with SFP slots
• Media converters and fiber gateway equipment
• Network expansions and replacement of failed GPON ports

Key specifications

• Form factor: SFP (small form-factor pluggable)
• Fiber type: single-fiber, single-mode
• Connector: SC/APC
• Application class: GPON B+ (standard GPON optical budget range)
• Wavelengths: GPON-standard downstream/upstream wavelengths for B+ class
• Operating temperature range: suitable for typical indoor telecom equipment

How to use

Insert the SFP transceiver module into an empty SFP slot on compatible OLT, ONT or media converter equipment while the host device is powered off or following the vendor’s hot-swap procedure. Connect a single-fiber SC/APC patch cable to the module’s SC/APC receptacle, ensuring correct alignment and secure mating. Configure the host device’s GPON interface according to your network settings and verify optical levels and link status using the equipment management interface or an optical power meter.

Recommendations

Handle the SC/APC connector with care to avoid contamination; always use dust caps when the port is not connected. Confirm host device compatibility with GPON B+ optical parameters and consult equipment documentation for supported SFP transceiver models before installation.