Módulo transceptor SFP28 BlueOptics BO27Q13640D-BO 25000 Mbit/s

The BlueOptics BO27Q13640D-BO SFP28 transceiver module is a single-mode fiber optic pluggable transceiver designed for 25 Gbit/s networks. Housed in a metal enclosure and weighing approximately 40 g, it implements the SFP28 interface and supports high-speed optical links with long mean time between failures (MTBF ~1,000,000 hours). The module uses an LC duplex connection and is intended for use in MSA-compliant network devices that accept SFP28 form-factor optics.

Advantages

The module offers a compact SFP28 form factor with a metal housing for mechanical robustness and heat dissipation. With a rated maximum data transfer rate of 25,000 Mbit/s and a high MTBF value, it is suitable for continuous operation in demanding network environments. Its silver-coloured housing and low weight make it easy to handle and install in standard SFP28 slots.

Suitable for

• 25 Gbit/s Ethernet uplinks and server connections
• Optical interconnects between switches and routers using single-mode fiber
• High-availability data centre links and campus backbone segments
• Environments requiring MSA-compliant pluggable optics

Key specifications

• Interface type: SFP28
• Maximum data transfer rate: 25,000 Mbit/s
• Fiber type: single-mode (LC duplex connector)
• Housing: metal enclosure
• Weight: 0.04 kg
• Product colour: silver
• MTBF: approx. 1,000,000 hours

How to use

Install the SFP28 transceiver into a compatible SFP28 slot on a switch, router, server NIC or other network device following the vendor instructions for hot-pluggable modules. Connect single-mode LC duplex fiber patch cords to the transceiver’s LC ports, ensuring correct transmit/receive orientation. Verify link status and supported data rate in the host device management interface and enable any required diagnostics or DOM/DDM features if supported by the system.

Recommendations

Use certified single-mode LC duplex patch cords and, where available, enable digital diagnostics (DDM/DOM) in the host device to monitor optical power, temperature and supply voltage. Confirm compatibility with the specific hardware platform and firmware version before deployment and follow ESD handling procedures during installation to avoid damage.