Soporte para módulo solar Offgridtec 5 W - 30 W, negro

• Solar module bracket 5W - 30W black
• Bracket for 5W – 30W solar modules
• Incl. screw set

With this solar module bracket stand you can screw your module "standing" onto a flat roof or any other surface with sufficient load-bearing capacity. The set consists of a stand with tiltable bracket axis. Also included are module adapter strips of different lengths with which the module can be attached to the bracket. The included module adapters are suitable for solar modules in the power range of 5-30W. Thanks to the flexible tilt angle of the mount, an optimal alignment of the solar module can be achieved.

The bracket itself is connected to the surface through four drill holes. As standard, Offgridtec supplies dowels and screws for fastening in reinforced concrete. However, the bracket can also be mounted on wooden beams or stone walls with appropriate screws.

A pair of M6 wing nuts with lock washer and washer + matching 16x6 hex nuts for screwing the module to the adapter strip are also included in the scope of delivery.

• Mounting note: Please note that you may need to drill 2 holes in the frame of your solar module in order to screw the module to the bracket. This depends entirely on the type of solar module and the factory-made holes. If you have to drill into the frame, we definitely recommend using a depth stop when drilling so as not to damage the back of the solar module.
• Module stand with tiltable axis for optimal module tilt
• Module adapter strip 22cm, 36.5cm, 41.5cm

Galvanized wing nuts, lock washers and washers as well as 4 pcs. 6x16mm nuts for module attachment to the adapter strip

4 pieces 6x50mm screws + dowels for fastening in brick walls or reinforced concrete walls