Philips CorePro LED PLC 8.9W 830 2P G24d-3 KVG/VVG | Lámpara LED de enchufe de bajo consumo

Replacing conventional CFL plug-in lamps often means compromising on light quality or dealing with frequent replacements. The Philips CorePro LED PLC 8.9W 830 2P G24d-3 solves this by delivering warm, high-quality light with a long lifespan and significant energy savings, all in a familiar plug-in form factor. Designed as a direct retrofit for existing fixtures with magnetic ballasts, it eliminates the hassle of rewiring while cutting energy consumption by up to 66% compared to a 26W CFL.

Who is it for

This lamp is ideal for commercial and residential applications where G24d-3 2-pin CFL lamps are currently in use. It suits hotels, offices, retail spaces, corridors, and downlights that require reliable, warm-white illumination with minimal maintenance. Facility managers and homeowners looking to upgrade to LED without replacing entire fixtures will appreciate its straightforward installation.

Main features

• Direct retrofit for 26W CFL lamps with G24d-3 2-pin base and magnetic ballast (KVG/VVG) – no rewiring needed.
• Warm white light (3000K) with a high colour rendering index (>80) for natural, comfortable illumination.
• Long lifetime of up to 30,000 hours (L70B50), reducing replacement frequency and maintenance costs.
• Instant full light output with a start-up time under 0.5 seconds – no flicker or warm-up delay.
• Energy efficiency class F under the new EU energy labelling regulation, with only 8.9W power consumption.
• Mercury-free construction for safer disposal and environmental friendliness.
• Wide beam angle of 120° for even light distribution in open fixtures.
• High switching resilience: rated for 50,000 on/off cycles, suitable for areas with frequent switching.

Specifications

• Lighting technology: LED
• Lamp type: PLC (plug-in compact)
• Base: G24d-3 (2-pin)
• Power consumption: 8.9 W
• Equivalent wattage: 26 W (CFL)
• Luminous flux: 1050 lm
• Colour temperature: 3000 K (warm white)
• Colour rendering index (CRI): >80
• Dimmable: No
• Rated lifetime (L70/B50): 30,000 hours
• Beam angle: 120°
• Operating temperature range: -20°C to +45°C
• Energy efficiency class (new ERP): F
• Switching cycles: 50,000
• Mercury content: 0 mg
• Start-up time: <0.5 s
• Ballast compatibility: Magnetic/conventional ballast (KVG/VVG)
• Housing material: Plastic
• Input frequency: 50/60 Hz (ballast dependent)
• Power factor: >0.9

Tips

Always switch off the power before installation. Ensure the existing ballast is a magnetic type (KVG/VVG); electronic ballasts are not compatible. For best results, use in open fixtures that allow adequate heat dissipation. Dispose of old CFL lamps according to local regulations, as they contain mercury.