Philips MASTERColour CDM-T Elite 70W/930 G12 73W 3000K 7800lm

The Philips MASTERColour CDM-T Elite 70W/930 G12 is a ceramic metal-halide lamp designed for applications that require high luminous efficacy and stable color rendering. With a nominal power of 73 W and a warm white color temperature of 3000 K, this lamp delivers a luminous flux of 7800 lm while maintaining compact dimensions (20 mm diameter, 103 mm height). The lamp is intended for use in compatible G12 ceramic metal-halide fixtures and provides consistent white light suitable for retail, hospitality and architectural accent lighting.

Advantages

This ceramic metal-halide lamp offers high luminous efficacy and good color rendering, producing uniform warm-white illumination at 3000 K. Its compact form factor and stable light output make it suitable for directional and accent luminaires. The lamp is classified in a high energy efficiency category, delivering strong light output relative to its power consumption. Low mercury content supports compliance with environmental handling requirements.

Suitable for

• Retail display lighting and showcase illumination
• Hospitality areas such as hotels and restaurants
• Architectural accent and facade lighting
• Exhibition stands and museum display lighting

Key specifications

• Nominal power: 73 W
• Luminous flux: 7800 lm
• Color temperature: 3000 K (warm white)
• Base type: G12 ceramic metal-halide
• Dimensions: approx. 20 mm diameter, 103 mm height
• Mercury content: 6.6 mg
• Energy efficiency class: A+

How to use

Install the lamp only in fixtures designed for ceramic metal-halide lamps with a G12 base and compatible ballast or electronic control gear. Ensure power is switched off before replacing lamps. Allow appropriate warm-up time after switch-on to reach full luminous flux and color stability. For safe operation, handle the lamp by the base and avoid direct contact with the arc tube surface; follow the fixture manufacturer's installation instructions.

Recommendations

Use the lamp in ventilated luminaires to avoid overheating and ensure the specified lifetime. Replace lamps in pairs or groups where uniform color and light level are required. Dispose of used lamps according to local regulations for lamps containing mercury.