Plastificadora en caliente Leitz iLAM Office A3 400 mm/min

The Leitz iLAM Office A3 hot laminator is a slim, fast-preheating machine designed for reliable office lamination. It supports pouches from 80 to 125 microns, offers a maximum lamination width of 320 mm (A3 format) and delivers a lamination speed of 400 mm/min. With a one-minute warm-up time and compact dimensions, it is suited for small-batch laminating in modern offices.

Advantages

Fast 1-minute warm-up and a lamination speed of 400 mm/min enable quick processing of documents. The unit is compact and slim for easy storage and a neat workspace. Energy-efficient design with 375 W power consumption and automatic shut-off after 30 minutes of inactivity reduces energy use. Simple operation with LED ready indicators and an audible alert, plus a starter kit of free pouches included for immediate use.

Suitable for

• Laminating A3 and A4 documents
• Small-batch office laminating tasks
• ID cards, signs, menus and frequently handled documents
• Protecting printed materials with 80–125 micron pouches

Key specifications

• Brand: LEITZ
• Model: iLAM Office A3 (MPN 72530084)
• Max lamination width: 320 mm (A3)
• Lamination speed: 400 mm/min
• Supported pouch thickness: 80–125 microns
• Warm-up time: 1 minute
• Power consumption: 375 W
• Dimensions (W×D×H): 465 × 128 × 76 mm
• Includes: starter kit of laminating pouches

How to use

Plug the laminator into a suitable mains socket and switch it on. Wait for the LED ready indicator and/or audible alert, which signal that the 1-minute preheat is complete. Insert a document into a pouch, align the closed edge first and feed the pouch slowly into the laminator using the entry guides. Allow the laminated item to exit fully before handling; typical throughput is about 45 seconds for an 80-micron A4 sheet. Switch the device off or allow it to auto shut-off after periods of inactivity.

Recommendations

Use pouches within the specified 80–125 micron range for reliable results. For best results with thin pouches (80 µm), feed the pouch slowly and allow sufficient cooling time after lamination. Store the laminator on a flat, heat-resistant surface and keep the feed path clear of debris. If laminating thicker or multiple items, monitor the process to ensure proper adhesion and alignment.