Regleta de enchufes Brennenstuhl Premium-Line Technic Alu

The Brennenstuhl Premium-Line Technic Alu is a 19" wide, 1U power strip designed for installation in 19" network or server cabinets. Made with an aluminium housing and black accents, it provides eight earthed AC outlets arranged at a 45° angle for easier use with angled plugs and includes a built-in switch. The unit comes with a 2 m H05VV-F 3G1.5 cable and childproof sockets; its nominal current rating is 16 A and its overall length is approximately 48 cm.

Advantages

Constructed from aluminium for durability and heat dissipation, this power strip fits standard 19" racks while remaining only 1 HU tall to save space. The 45° angled, earthed sockets accommodate angled plugs without blocking neighboring outlets, and the childproof design increases safety. A built-in switch allows convenient local control of connected equipment.

Suitable for

• Rack-mounted network equipment in server rooms
• 19" cabinets for telecommunications and IT installations
• Home or small office racks requiring multiple earthed outlets
• Setups where angled plugs are used or space between sockets is limited

Key specifications

• Dimensions: 19" wide, 1 HU tall, length approx. 48 cm
• Sockets: 8 earthed AC outlets in 45° arrangement
• Cable: H05VV-F 3G1.5, length 2 m
• Nominal current: 16 A
• Colour: Aluminium / Black
• Equipment: with switch; childproof sockets

How to use

Install the unit into a standard 19" rack or cabinet using appropriate mounting hardware. Connect the power strip's mains cable to a suitable grounded outlet rated for 16 A. Plug devices into the earthed sockets, observing the 45° orientation to accommodate angled plugs. Use the integrated switch to turn power to connected equipment on or off as needed.

Recommendations

Do not exceed the nominal current of 16 A for the combined load. Ensure the rack or cabinet provides adequate ventilation and that the power strip is secured to prevent strain on the cable or sockets. For permanent installations in critical environments, verify compatibility with local electrical standards and consult a qualified electrician if required.