SAI Line Interactive ACT 1000VA - 600W con AVR, pantalla LCD

Protect your computer and valuable files at home or at the office against power failures and surges with the AC2310 Line Interactive UPS 1000VA - 600W with AVR. The UPS is equipped with 2x IEC C13 output, 2x EU socket type F, 1x USB and 1x RS232. The UPS notifies you with a sound alarm and notification on the LCD screen during a power failure. It provides you with approximately 50 extra minutes @ 120W load to save your files. It comes with software that shuts down your computer safely. The AC2310 has surge, short circuit, discharge, overcharge and overload protection.

Backup power of approx. 50 minutes @ 120W load
The AC2310 Line Interactive UPS 1000VA has two IEC C13 outputs, two EU socket type F female, one USB port and one RS232 connection to protect your computer and valuable files against power failures and surges. The built-in battery of the Line Interactive UPS allows you to save your files within approximately 50 minutes @ 120W load.

Notification during power failure
The UPS notifies you with a sound alarm and a notification on the LCD display during a power failure. The UPS also notifies you when the built-in battery is running out of power. The built-in status LCD shows you the battery status.

Including PC software
The AC2310 comes with PC software. This software enables you to monitor the status of the UPS. Furthermore, the software makes sure that your computer automatically will shut down during a power failure.

AVR function for a stable output voltage
The AC2310 has an Automatic Voltage Regulation function. This AVR function corrects the incoming voltage fluctuations and ensures a stabile output power. Besides, the UPS has surge, short circuit, discharge, overcharge and overload protection.

ACT Line Interactive UPS 1000VA - 600W with AVR, LCD display. UPS topology: Line-Interactive, Output power capacity: 1 kVA, Output power: 600 W. AC outlet types: C13 coupler, Type F, AC outlets quantity: 4 AC outlet(s), USB port type: USB Type-B. Form factor: Compact, Product colour: Black, Display type: LCD

How to use

Connect the UPS mains input to a properly rated AC outlet and plug your equipment into the UPS AC outlets. Install the supplied PC software and connect the UPS to your computer via the USB Type‑B or RS232 port to enable monitoring and automatic shutdown. During normal voltage variations the AVR will regulate output; the battery provides power during mains failures. Monitor the LCD for battery status and alarms, and follow on‑screen or audible alerts when battery replacement is required.

Recommendations

Place the UPS in a well‑ventilated, dry location away from heat sources. Regularly test the battery and perform scheduled maintenance checks. Do not exceed the rated 600 W output; distribute connected loads across the provided AC outlets and use the supplied software to ensure graceful shutdowns during extended outages.