Sierra de mesa EINHELL TC-TS 8 con hoja de sierra de 210 mm, 230 V

Straight, repeatable cuts in solid wood and panel materials can be a challenge in a home workshop without a stable, accurate saw. The Einhell TC-TS 8 benchtop table saw solves this with a compact design that fits on a workbench, a 210 mm TCT blade, and an adjustable cutting system for crosscuts, rip cuts, and mitre cuts. Powered by a 230 V motor with 800 W output (S2 10 min), it delivers reliable performance for renovation, furniture making, and general carpentry.

Who is it for

This table saw is ideal for DIY enthusiasts, hobby woodworkers, and small professional jobs. Whether you are cutting softwood, hardwood, or laminated panels, the TC-TS 8 provides the precision and control needed for furniture components, trim work, and home renovation tasks. Its compact footprint makes it suitable for workshops with limited space or for mobile use on a stand.

Main features

• 210 mm TCT saw blade with 24 teeth and 30 mm bore for clean cuts
• Adjustable blade height and bevel angle (0–45°) for versatile cutting profiles
• Stable table surface (500 x 335 mm) with integrated rip fence for guided straight cuts
• Maximum cutting height of 45 mm at 90° and 27 mm at 45°
• Idle speed of 2950 min⁻¹ for efficient cutting in wood materials
• Dust extraction port (36 mm) to connect a vacuum and keep the workspace clean
• Included parallel stop and angle stop for accurate repeat cuts
• Compact benchtop design for easy storage and transport

Specifications

• Power (S1): 500 W
• Power (S2 10 min): 800 W
• Mains voltage: 230 V / 50 Hz
• Idle speed: 2950 min⁻¹
• Saw blade diameter: 210 mm
• Saw blade bore diameter: 30 mm
• Number of saw blade teeth: 24
• Max. cutting height at 90°: 45 mm
• Max. cutting height at 45°: 27 mm
• Table size: 500 x 335 mm
• Table tilt range: 0–45°
• Dust extraction port diameter: 36 mm
• Sound power level LWA: 105 dB(A)
• Sound pressure level LPA: 92 dB(A)
• Blade type: TCT (tungsten carbide tipped)
• Included: parallel stop, angle stop

Tips

Always place the saw on a flat, stable surface and secure the workpiece firmly against the rip fence or mitre gauge. For cleaner cuts and longer blade life, connect a dust extractor to the 36 mm port. Adjust the blade height so it protrudes just above the material thickness, and use a push stick for narrow cuts. Regularly check blade alignment and tighten all knobs before operation.