Soporte de TV Gembird WM-60ST-01 para televisores de 32 inch-60 inch, VESA 100x100-400x400, hasta 36,4 kg, inclinable -2°-10°, distancia a la pared 4,2-45,2 cm, negro

The Gembird WM-60ST-01 is a wall mount designed for single flat-panel TVs from 32 to 60 inches. It supports VESA mounting patterns from 100 x 100 mm to 400 x 400 mm and a maximum load of 36.4 kg. The bracket provides a tilt adjustment from -2° to 10° and positions the display between 4.2 and 45.2 cm from the wall, allowing for both compact placement and a small range of angle correction for optimal viewing.

Advantages

The mount combines a wide VESA compatibility range with a relatively high weight capacity, making it suitable for many mid-size TVs. Its adjustable tilt permits minor angle changes to reduce glare and improve viewing height, while the variable wall distance gives flexibility during installation and helps accommodate cables and wall irregularities. The matte black finish integrates with most screen designs and interior styles.

Suitable for

Key specifications

How to use

Select a suitable mounting location on a solid wall surface and verify that the chosen TV and its VESA pattern fall within the mount’s supported range. Secure the wall plate using appropriate anchors or bolts for the wall type and ensure they are rated for the combined weight. Attach the matching brackets to the TV using the correct bolts and spacers for the TV’s mounting holes. Lift the TV onto the wall plate according to the manufacturer’s alignment marks and check that the locking mechanism is engaged. Adjust the tilt within the -2° to 10° range to achieve the desired viewing angle and confirm the display is level. Route cables so they are not pinched between the wall and mount.

Recommendations

Before installation, confirm wall construction and use suitable fixings rated for at least the maximum load capacity. If uncertain about mounting into drywall, masonry, or studs, consult a qualified installer. When adjusting tilt, make small incremental changes and verify that all fasteners remain secure after final positioning.