SPT PUMPEN SPT 370 W/S - Bomba sumergible para aguas sucias con interruptor de flotador 0,37 kW | 230V

When a cellar floods or a construction pit fills with muddy water, the SPT PUMPEN SPX370S00 goes to work. This submersible dirty water pump with integrated float switch automatically starts and stops as water levels change, so you can leave it unattended while it clears the mess. Powered by a 0.37 kW single-phase motor, it moves up to 7,500 litres per hour and handles solids up to 30 mm, making it ideal for drainage tasks around the home, farm, or job site.

Key specifications

• Motor power: 0.37 kW, 230 V, 50 Hz
• Maximum flow rate: 7,500 l/h
• Maximum delivery head: 6 m
• Maximum particle size: 30 mm
• Outlet diameter: 1 1/4" (DN32)
• Housing material: technopolymer
• Impeller type: vortex
• Maximum submersion depth: 5 m
• Cable length: 10 m
• Protection class: IPX8
• Maximum liquid temperature: 35 °C
• Integrated thermal protection

Why choose it

The vortex impeller design resists clogging, even when the water is full of leaves, sand, or small stones. The corrosion-resistant technopolymer housing is lightweight yet tough, and the built-in float switch means you don’t have to monitor the pump constantly. With IPX8 waterproofing and a 10-metre power cable, you can place it deep in a sump or pond without worry.

Ideal use cases

• Draining flooded cellars and basements
• Emptying ponds, water tanks, and swimming pools
• Removing water from construction sites and trenches
• Clearing sumps and drainage pits
• Transferring dirty water for irrigation or disposal

Good to know

The pump is designed for continuous or intermittent operation and includes thermal overload protection to prevent motor damage. It is not suitable for pumping flammable, corrosive, or explosive liquids. For best results, ensure the pump is fully submerged before operation and clean the intake screen regularly.