SSD M.2 NVMe interno AFOX ME300 128GB (PCIe x4, 3D NAND, hasta 1,6 GB/s de lectura, 600 MB/s de escritura)

AFOX ME300 M.2 NVMe 128GB is an internal SSD in M.2 form factor that connects via PCIe 3.0 (x4) and uses 3D NAND TLC memory. It is intended for use in servers and workstations, delivers up to 1.6 GB/s sequential read and up to 600 MB/s sequential write, operates at 5 V, and is designed with vibration protection. The drive is specified to operate in ambient temperatures from 0 to 70 °C and is supplied with a user manual.

Advantages

The SSD offers a compact M.2 form factor with NVMe over PCIe 3.0 for higher throughput compared with SATA drives, 3D NAND memory for efficient density, rated sequential read speeds up to 1.6 GB/s and write speeds up to 600 MB/s, and vibration protection suitable for server and workstation environments. The drive operates at a standard 5 V and supports typical industrial operating temperatures.

Suitable for

Key specifications

How to use

Install the M.2 NVMe SSD into a compatible M.2 slot on a motherboard or adapter that supports PCIe 3.0 x4 and NVMe protocol. Secure the module with the appropriate mounting screw, connect power through the motherboard slot (5 V provided by the host), and initialize the drive in the operating system or BIOS/UEFI. Follow the supplied user manual for any specific installation steps or system configuration recommendations.

Recommendations

Protect the SSD from moisture and install it in systems that provide adequate cooling and stable power. Use the drive in supported temperature ranges (0–70 °C) and in devices with NVMe/PCIe 3.0 x4 support for optimal performance.