SUNLU PETG Filament 1,75 mm amarillo 1 kg

The SUNLU PETG Filament in Yellow is a high-quality 3D printing material designed for FDM printers. With a diameter of 1.75 mm and a net weight of 1 kg, this filament offers excellent layer adhesion, low shrinkage, and high strength. It is vacuum sealed with desiccant to ensure optimal printing conditions.

Advantages

PETG combines the ease of printing of PLA with the durability of ABS. It provides high toughness, good chemical resistance, and minimal warping, making it ideal for functional parts and prototypes.

Suitable for

• FDM 3D printers with a heated bed
• Functional prototypes and end-use parts
• Mechanical components requiring strength and durability
• Projects needing chemical resistance

Key specifications

• Material: PETG (Polyethylene Terephthalate Glycol)
• Color: Yellow
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.02 mm
• Net Weight: 1 kg
• Gross Weight: Approx. 1.28 kg
• Recommended Printing Temperature: 220-250 °C
• Recommended Heated Bed Temperature: 70-80 °C
• Recommended Print Speed: 40-80 mm/s
• Density: 1.23 g/cm³
• Tensile Strength: 50-60 MPa
• Elongation at Break: 200-250%
• Heat Deflection Temperature (HDT): 70 °C (at 0.45 MPa)
• Spool Diameter: 200 mm
• Spool Hub Diameter: 56 mm
• Spool Width: 65 mm
• Filament Length: Approx. 330-340 meters
• Packaging: Vacuum sealed with desiccant
• Compatibility: FDM 3D Printers

Recommendations

For best results, store filament in a dry environment and use a heated bed. Adjust print temperature within the recommended range to optimize layer adhesion and surface finish.