SUNLU PLA+ 2.0 Filamento (gris) 1,75 mm 1 kg

The SUNLU PLA+ 2.0 Filament in Gray is a high-performance 3D printing material designed for FDM printers. With enhanced toughness and reduced brittleness compared to standard PLA, it offers excellent layer adhesion and low warping, making it ideal for both beginners and professionals.

Advantages

PLA+ 2.0 provides superior strength and durability while maintaining the ease of printing associated with PLA. Its improved impact resistance and dimensional accuracy ensure reliable prints with a smooth matte finish. The filament is vacuum sealed with desiccant to keep it dry and ready for use.

Suitable for

• Prototyping and functional parts
• Artistic and decorative models
• Educational projects
• General-purpose 3D printing

Key specifications

• Material: PLA+ (Polylactic Acid Plus)
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.02 mm
• Net Filament Weight: 1 kg
• Color: Grey
• Recommended Print Temperature: 200-230°C
• Recommended Bed Temperature: 50-65°C
• Tensile Strength: ≥60 MPa
• Elongation at Break: ≥20%
• Density: 1.24 g/cm³
• Melt Flow Index: 8-12 g/10min (190°C, 2.16kg)
• Spool Diameter: 200 mm
• Spool Width: 64 mm
• Spool Hub Diameter: 56 mm
• Packaging: Vacuum sealed with desiccant
• Compatibility: FDM 3D Printers
• Shore Hardness: D60

Recommendations

For best results, store filament in a dry environment and use a filament dryer if necessary. Adjust print temperature within the recommended range based on your printer and desired finish.