Switch Gigabit SFP PoE+ industrial Exsys EX-62035MPOE-SFP — 8 puertos PoE+ + 2 SFP, gestión web

The Exsys EX-62035MPOE-SFP is an industrial gigabit SFP PoE+ switch designed for stable operation in commercial and industrial networks. It provides eight PoE+ Ethernet ports that supply power and data to connected devices and two SFP uplink slots for fiber connectivity. The switch is web-managed, enabling configuration and monitoring through a browser interface and supporting centralized deployment of IP cameras, wireless access points and other powered devices that require reliable power delivery and extended reach.

Advantages

This industrial switch combines PoE+ power delivery with gigabit performance and SFP uplinks in a single compact unit. Its web-managed interface allows remote configuration, status monitoring and basic troubleshooting without requiring a dedicated management station. The dual SFP slots enable fiber links for long-distance connections and improved noise immunity, while the eight PoE+ ports supply up to 30 W per port to support modern networked devices. The metal housing and industrial-grade design provide durable operation in harsher environments typical for surveillance and access network deployments.

Suitable for

• IP surveillance systems with multiple PoE cameras
• Wireless access point deployments where centralized PoE power is needed
• Small to medium industrial automation networks
• Edge aggregation in commercial LANs requiring fiber uplinks

Key specifications

• Port count: 8 gigabit Ethernet PoE+ ports and 2 SFP slots
• PoE standard: IEEE 802.3at (PoE+), up to 30 W per port
• Management: Web-based management interface for configuration and monitoring
• Uplink: Two SFP slots for fiber modules (single-mode or multi-mode as required)
• Switching capacity: Gigabit throughput on all Ethernet ports for high-bandwidth devices
• Chassis: Industrial-grade metal housing suitable for DIN-rail or wall mounting (depending on mounting kit)

How to use

Install the switch in a suitable location with proper ventilation and mounting, connect the SFP modules if fiber uplinks are required, and attach Ethernet cables to the PoE+ ports for powered devices. Access the web management interface via a browser using the switch IP address to configure VLANs, PoE settings and link parameters, and to check port status and power consumption. For initial deployment, verify fiber module compatibility and set appropriate link speeds and duplex settings as needed.

Recommendations

Place the switch in a dust-free, ventilated area and ensure the aggregated PoE power budget meets the total requirement of connected devices. Use compatible SFP modules for the required distance and fiber type, and regularly monitor port status through the web interface to detect connection or power issues early.