Synergy 21 LED Flex Strip COB - NW DC24V 150W IP67 CC 15m ULS

The Synergy 21 LED Flex Strip COB (Chip-on-Board) delivers uniform, dot-free natural white light with a color temperature of 4000K. Designed for professional indoor and outdoor applications, this 15-meter strip operates at DC 24V and consumes 150W total (10W/m). With an IP67 rating, it is dust-tight and protected against temporary water immersion, making it suitable for kitchens, bathrooms, coves, and signage. The high CRI (>80 Ra) ensures accurate color rendering, while the 180° beam angle provides wide illumination. The strip is dimmable with a compatible DC24V dimmer and can be cut at marked intervals for custom lengths. Self-adhesive backing simplifies installation. Note: A DC 24V constant voltage LED driver is required (not included).

Advantages

COB technology eliminates dotting for a smooth light line. IP67 protection allows use in damp or dusty environments. High efficacy at 1000 lm/m reduces the number of strips needed. Dimmable and cuttable for flexible design.

Suitable for

• Architectural accent lighting
• Under-cabinet lighting in kitchens
• Display case and shelf lighting
• Signage and channel letters
• Outdoor covered areas (e.g., awnings, patios)

Key specifications

• LED Technology: Chip-on-Board (COB)
• Light Color: Natural White (4000K)
• Operating Voltage: DC 24V
• Total Power Consumption: 150W (10W/m)
• Total Length: 15m
• Luminous Flux: ~15000 lm total (~1000 lm/m)
• Color Rendering Index: >80 Ra
• Beam Angle: 180°
• IP Rating: IP67
• Dimmability: Yes (with compatible DC24V dimmer)
• Cuttable: Yes (at marked intervals)
• Adhesive Backing: Yes (3M self-adhesive tape)
• Lifespan: >50,000 hours
• Operating Temperature: -20°C to +45°C
• Certifications: CE, RoHS

Recommendations

For optimal performance, pair with a constant voltage DC24V LED driver rated for at least 150W. Ensure proper heat dissipation when mounting on non-metallic surfaces. Not suitable for direct burial or continuous submersion.