Toma de corriente con toma de tierra DELOCK Easy 45 T13 Suiza 45×45 mm, 250 V / 10 A, blanco

The DELOCK Easy 45 grounded power socket for Switzerland (T13) is a compact surface-mounted wall outlet designed for residential and light commercial use. With a 45 × 45 mm front plate and white ABS plastic housing, the socket provides a grounded T13 connection rated at 250 V and 10 A (maximum 2500 W). The unit is supplied as a single module in a box and features a simple snap-in mechanism that secures the module while allowing easy removal for maintenance. The installation uses screw mounting and the design requires a minimum mounting depth of approximately 4.5 cm.

Advantages

The DELOCK Easy 45 socket combines a small footprint with standard Swiss T13 grounding compatibility, making it suitable where space is limited. Its ABS plastic housing in white offers a neutral appearance that blends with typical interiors. The proven snap-in mechanism ensures the module remains firmly in place yet can be removed quickly for servicing or replacement. Rated for 250 V / 10 A, the socket supports everyday electrical loads within its specified maximum power.

Suitable for

• Residential wall outlets in Swiss installations (T13)
• Light commercial or office power points with standard domestic loads
• Locations requiring a compact 45×45 mm front plate footprint
• Applications where a removable module is beneficial for maintenance

Key specifications

• Front plate dimensions: 45 × 45 mm
• Connection type: Swiss T13 grounded outlet
• Rated voltage: 250 V
• Rated current: 10 A (maximum power 2500 W)
• Housing material: ABS plastic
• Product colour: White
• Mounting: Surface-mounted with screw installation
• Minimum mounting depth: approx. 4.5 cm

How to use

Turn off the power supply before installation and verify that the circuit is de-energized. Position the unit on the prepared surface and secure it using appropriate screws through the designated mounting points. Connect the incoming live, neutral and protective earth conductors to the corresponding terminals following local wiring regulations for Swiss T13 outlets. After tightening the terminal screws and checking connections, snap the module fully into the front plate until it is firmly seated. Restore power and test the outlet with a suitable device or tester to confirm correct operation.

Recommendations

For safety and compliance, have installation and any wiring adjustments performed or inspected by a qualified electrician and ensure the outlet is used within its rated 250 V / 10 A limits; avoid heavy loads that exceed the maximum power rating.