Toma de corriente industrial Bachmann 910.002, 5P, 400 V, 16 A, IP44, policarbonato, azul/rojo/blanco

Industrial socket-outlet Bachmann 910.002 is a 5-pole connector for three-phase power systems. Rated at 400 V and 16 A, the unit has a polycarbonate housing with cable kink protection and an IP44 rating for splash and contact protection. Available in blue, red and white colour variants, it is intended for temporary and fixed installations where a durable, splash-resistant connection is required.

Advantages

The polycarbonate construction provides mechanical strength and resistance to impact while keeping the product lightweight. Cable kink protection improves strain relief and reduces the risk of cable damage at the entry point. IP44 protection ensures reliable operation in environments with water splashes and dust exposure. The 5-pole configuration supports three-phase applications with a protective earth and neutral.

Suitable for

• Workshops and production floors
• Construction sites and temporary power setups
• Stage and event power distribution
• Maintenance and industrial machinery connections

Key specifications

• Brand: Bachmann
• Model / MPN: 910.002
• Poles: 5P (five-pole)
• Rated voltage: 400 V~
• Rated current: 16 A
• Ingress protection: IP44
• Housing material: Polycarbonate
• Colours: Blue / Red / White
• EAN: 4016514010806

How to use

Install the socket-outlet according to local electrical regulations and safety standards. Ensure power is turned off before wiring. Secure the polycarbonate housing and route the supply cable through the provided entry with cable kink protection to achieve proper strain relief. Connect the five conductors (three phases, neutral, protective earth) to the corresponding terminals, verify tightness, and confirm correct polarity and earthing before restoring power.

Recommendations

Use the Bachmann 910.002 in environments compatible with its IP44 rating and avoid continuous exposure to heavy water jets or immersion. Periodically inspect the cable entry and terminals for wear or damage and replace the unit if the housing or contacts show signs of degradation.