Transceptor QSFP BlueOptics QSFP-100G-LR4-WDM1300-A-BO 10000 Mbit/s

The BlueOptics QSFP-100G-LR4-WDM1300-A-BO is a QSFP28 transceiver module engineered for high-speed optical data transmission. It supports a maximum data rate of 10000 Mbit/s and is designed for single-pair LC duplex fiber connections. The module is silver in color, weighs approximately 40 g, and follows the QSFP28 form factor. With an MTBF of around 3,000,000 hours and component selection that follows MSA compatibility, this transceiver delivers stable operation for long-distance links up to 10,000 m when paired with appropriate single-mode fiber and compatible hardware.

Advantages

The transceiver implements LR4 WDM CWDM transmission and reception functions, enabling 100GBASE-LR4 optical links over standard LC duplex connectors. Manufactured in accordance with MSA standards and using established optical and IC components, the module offers compatibility with common vendor platforms that accept H3C-compatible QSFP-100G-LR4 modules. Integrated digital diagnostics (DDM/DOM) provide real-time monitoring of optical power, temperature, and supply parameters. The product is suitable for deployments requiring high availability, low latency and long-term operational reliability.

Suitable for (tasks / use cases)

Key specifications

How to use

Install the BlueOptics QSFP-100G-LR4-WDM1300-A-BO transceiver into a compatible QSFP28 port on switches, routers or other network devices that support H3C-compatible QSFP28 modules. Connect LC duplex single-mode fiber patch cables matching the module's LR4 WDM requirements, observing correct transmit/receive orientation. Ensure the host device firmware and optics policy accept third-party QSFP modules if necessary. Use the DDM/DOM interface to monitor optical power, temperature and other parameters for ongoing link validation. Always follow device-safe insertion and removal procedures to avoid electrostatic discharge and mechanical damage.

Recommendations

To achieve reliable long-distance 100G links, pair this QSFP28 transceiver with single-mode LC duplex fiber rated for LR4 WDM use, verify hardware compatibility with the host platform, and enable DDM/DOM monitoring where supported. Avoid bending fiber beyond manufacturer limits and maintain clean LC connectors to prevent signal loss.