Transceptor SFP BlueOptics 25G-SFP28-LR-EN-BO 25000 Mbit/s plateado

The BlueOptics 25G-SFP28-LR-EN-BO is a 25G SFP28 fiber optic transceiver designed for single-mode links with LC Duplex connectors. It supports data rates up to 25,000 Mbit/s and is housed in a durable metal enclosure with a lightweight design (approx. 20 g). The module implements industry-standard SFP28 electrical and mechanical interfaces for plug-and-play installation in compatible network equipment and offers long operational lifetime with a specified MTBF of 1,000,000 hours.

Advantages

This SFP28 transceiver provides high-speed 25G connectivity over single-mode fiber while maintaining MSA-compliant form factor and electrical signalling for wide interoperability. The metal housing offers mechanical robustness and thermal dissipation. A long mean time between failures (1,000,000 hours) and low weight make it suitable for dense installations and long-term deployments. Digital diagnostic monitoring (DDM/DOM) compatibility is supported when the host hardware implements the feature.

Suitable for

• 25G Ethernet uplinks between switches and routers
• Data center server-to-switch and switch-to-switch connections
• High-bandwidth storage networking and Fibre Channel over Ethernet applications
• Long-reach single-mode links up to typical LR distances (refer to system planning)

Key specifications

• Interface type: SFP28 (LC Duplex connector)
• Maximum data transfer rate: 25,000 Mbit/s
• Optical mode: Single-mode fiber (1310 nm transmitter/receiver wavelength)
• Housing: Metal enclosure
• Weight: 0.02 kg (approx. 20 g)
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the transceiver into a compatible SFP28 port on the switch, router or host adapter until it latches. Connect an LC Duplex single-mode fiber patch cable matching the transmitter/receiver orientation. Ensure the host device firmware and software recognise third-party modules or enable vendor-agnostic support if required. If the platform supports digital diagnostics, monitor optical power, temperature and supply parameters via the management interface to verify proper operation.

Recommendations

Use high-quality single-mode LC patch cords and verify link budgeting for LR distances. Confirm compatibility with the target hardware and enable DDM/DOM monitoring to aid in troubleshooting and preventative maintenance.