Transceptor SFP BlueOptics BFH2-BO 25000 Mbit/s SFP28 850 nm

The BlueOptics BFH2-BO SFP28 transceiver is a compact fiber optic module designed for high-speed short-reach data links. Supporting a maximum data transfer rate of 25000 Mbit/s over multimode fiber at an operating wavelength of 850 nm, this module fits standard SFP28 ports and uses an LC fiber connector. With a rated maximum transfer distance of 100 m and a mean time between failures (MTBF) of 1,000,000 hours, the transceiver is intended for reliable 2.5 Gigabit Ethernet-compatible media conversion and connectivity in data centers, server racks and network aggregation points.

Advantages

The BlueOptics BFH2-BO offers a high nominal throughput in a small form factor suitable for SFP28 slots, enabling denser port deployments without occupying more space. Its 850 nm wavelength and LC connector ensure compatibility with common multimode fiber cabling, while the low module weight facilitates easy handling and deployment. The specified MTBF indicates long operational life under normal conditions, supporting continuous operation in managed networks.

Suitable for

Key specifications

How to use

Install the SFP28 transceiver into a compatible SFP/SFP28 slot on a switch, router or media converter, ensuring the module is fully seated and latched. Connect LC-terminated multimode fiber patch cords to the transceiver ports, observing correct polarity. Configure the connected network device for the intended Ethernet speed and verify link status via device LEDs or management interfaces. Handle the module by its housing and avoid touching the optical interfaces; keep protective dust caps on unused ports.

Recommendations

For reliable performance, use multimode fiber rated for short-reach 850 nm operation and maintain clean connector endfaces. Verify compatibility with the host device's supported SFP28 modules and update device firmware if required. Observe environmental limits specified by the host device and adhere to ESD precautions during installation.