Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s

Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
65,46 €
The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transc... Leer más
Stock 2813 Código 1485798 Marca BLUEOPTICS Modelo TOM-10G-SFPP-SR1-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Lunes, Octubre 26
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transceiver supports high-speed optical transmission over appropriate fiber types and is specified with a long mean time between failures (MTBF) to support continuous operation in network equipment.

Advantages

This SFP+ transceiver delivers 10 Gbit/s data transfer capacity in a compact, silver metal housing and is compatible with standard SFP+ interfaces. Its MSA-conformant design ensures mechanical and electrical interoperability with a wide range of network switches, routers and storage systems that accept SFP+ modules. The unit’s high MTBF provides a measure of long-term reliability for installations that require extended uptime.

Suitable for

Key specifications

How to use

Install the transceiver into an available SFP+ port on compatible network equipment until it latches. Connect the appropriate LC fiber patch cable (single-mode or multimode as required by the link and device support) to the module’s optical interface, observing correct transmit/receive orientation. Configure the host device for a 10 Gbit/s link and verify link status and diagnostics through the system management interface. Power down the host device only if required by the vendor; otherwise hot-plug insertion and removal are supported by SFP+ ports that allow hot-swap operation.

Recommendations

Ensure the transceiver is used in equipment that supports SFP+ modules and the intended optical wavelength and fiber type. Use quality LC duplex patch cords and follow manufacturer guidelines for connector cleaning and handling to maintain link performance. If digital diagnostic monitoring (DDM/DOM) is required, confirm that the host hardware provides DDM support to access real-time module parameters.
Aspectos destacados
  • 10 Gbit/s Ethernet uplinks and aggregation links
  • Fibre Channel over Ethernet and high-speed storage networking
  • Short- to mid-range optical connections in data centers and telecom closets (use appropriate fiber type)
  • Replacement or spare SFP+ module inventory in network hardware supporting SFP+ optics
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Housing material and colour: metal, silver
  • Weight: 0.02 kg (approx. 20 g)
  • Reliability indicator: MTBF approximately 1,000,000 hours
Especificaciones
Color del producto
Silver
Compatible con fibra monomodo (SMF)
Yes
Conector de fibra óptica
LC
Distancia máxima de transmisión
10000 m
Estándar de transceptor SFP
LR
Ethernet LAN
Yes
Longitud de onda de recepción (máx.)
1310 nm
Longitud de onda de transmisión (máx.)
1310 nm
Material de la carcasa
Metal
Peso
0.02 kg
Peso del embalaje
30 g
Tecnología de cableado Ethernet de fibra
10GBASE
Temperatura de funcionamiento (T-T)
0 - 70
Temperatura máxima de funcionamiento
70 °C
Temperatura mínima de funcionamiento
0 °C
Tiempo medio entre fallos (MTBF)
1000000 h
Tipo de interfaz
SFP+
Tipo de interfaz Ethernet
10 Gigabit Ethernet
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
10000 Mbit/s
Historial de precios de los últimos 6 meses
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Actual
65,46 €
Mínimo
64,48 €
Máximo
69,69 €
Variación 24 h
+0,97 €   +2%
Semana
+0,87 €   +1%
Mes
-1,72 €   -3%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.