Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm

Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
74,40 €
The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is... Leer más
Stock 20 Código 1485840 Marca BLUEOPTICS Modelo TRPEG1EEXC000E2G-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Martes, Octubre 27
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is designed to fit standard SFP ports using an LC duplex optical interface. The transceiver supports link reach up to 40,000 m over appropriate single‑mode fiber.

Advantages

The module follows MSA‑compatible SFP form‑factor standards to ensure mechanical and electrical interoperability with compatible network equipment. A compact metal enclosure provides mechanical protection and thermal stability. With support for 1310 nm optical transmission and a rated maximum distance of 40 km, the transceiver is suitable for long‑reach Ethernet and related optical protocols. Low weight and a standard 3.3 V interface simplify installation and replacement in switches, routers and media converters.

Suitable for

Key specifications

How to use

Power down or follow hot‑swap procedures recommended by your hardware vendor before inserting the SFP module into an SFP cage. Insert the transceiver into an empty SFP slot until it latches, then connect LC duplex patch cords to the transmit and receive ports, observing correct fiber polarity. Configure the host device for the intended optical link speed and protocol (up to 1250 Mbit/s) and verify link status through the device management interface. If the host supports digital diagnostic monitoring (DDM/DOM), enable or query the DDM functions to read real‑time parameters where available.

Recommendations

Use single‑mode LC duplex fiber and compatible patch cords for best range and signal quality. Verify compatibility with the target switch or router model and ensure the host firmware accepts third‑party SFP modules if required. Keep optical connectors clean and capped when not in use; follow ESD precautions when handling the transceiver.

Aspectos destacados
  • Single‑mode fiber links up to 40 km (1000BASE‑LH style applications)
  • Gigabit Ethernet and other 1.25 Gbit/s optical interfaces
  • Installation in switches, routers, media converters and compatible SFP slots
  • Point‑to‑point backbone connections and campus interconnects
  • Maximum data rate: 1250 Mbit/s
  • Wavelength: 1310 nm
  • Maximum transfer distance: 40,000 m (40 km) over single‑mode fiber
  • Optical connector type: LC duplex (SFP form factor)
  • Supply voltage: 3.3 V
  • Product colour / finish: silver metal housing
  • Weight: approx. 0.02 kg
Especificaciones
Color del producto
Silver
Conector de fibra óptica
SFP
Distancia máxima de transmisión
40000 m
Estándar de transceptor SFP
LH
Longitud de onda
1310 nm
Longitud de onda de recepción (máx.)
1310 nm
Longitud de onda de transmisión (máx.)
1310 nm
Material de la carcasa
Metal
Número de productos incluidos
1 pc(s)
Peso
0.02 kg
Peso del embalaje
30 g
Sistema dúplex
Full
Tecnología de cableado Ethernet de fibra
1000BASE
Temperatura de almacenamiento (T-T)
0 - 90
Temperatura de funcionamiento (T-T)
0 - 70
Temperatura máxima de funcionamiento
70 °C
Tensión de entrada
3.3
Tipo de interfaz
SFP
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
1250 Mbit/s
Historial de precios de los últimos 6 meses
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Actual
74,40 €
Mínimo
71,97 €
Máximo
76,97 €
Variación 24 h
+0,61 €   +1%
Semana
+0,46 €   +1%
Mes
+0,15 €   +0%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.