Ventilador de CPU Thermaltake ASTRIA 200 12 cm negro 500-1800 rpm 65 CFM

The Thermaltake ASTRIA 200 ARGB Lighting CPU Cooler is a single-tower air cooler with a 120 mm high-airflow ARGB fan and a top cap that creates a meteor-shower lighting effect. It uses four Ø6 mm U-shaped copper heat pipes with direct CPU contact and a redesigned fin stack to deliver up to 210 W TDP cooling capacity while remaining compatible with modern Intel and AMD sockets including LGA1700 and AM5.

Advantages

The cooler combines a decorative ARGB glowing top cover with practical cooling: 27 addressable LEDs (18 on the top cap and 9 on the fan) that can be synchronized via motherboard 5V ARGB headers, a 120 mm fan that delivers up to 65 CFM airflow and 2.56 mm-H2O static pressure at a noise level of 26.8 dBA, and four direct-contact heat pipes for efficient heat transfer. The fin stack and heat-pipe layout are designed to improve airflow and maintain good RAM clearance for wide compatibility.

Suitable for

• Cooling standard and mid-range desktop CPUs with up to 210 W TDP
• PC builds requiring ARGB lighting synchronized with motherboard software
• Systems where RAM clearance and single-tower layouts are preferred

Key specifications

• Fan size: 120 mm (120 x 120 x 25 mm)
• Fan speed: 500–1800 RPM
• Airflow: 65 CFM
• Static pressure: 2.56 mm-H2O
• Noise level: 26.8 dBA
• Heat pipes: 4 × Ø6 mm U-shaped copper heat pipes (direct contact)
• LEDs: 27 ARGB LEDs (18 top cap + 9 fan)
• Compatibility: Intel LGA1700 and other Intel sockets, AMD AM5 and other AMD sockets
• MPN / EAN: CL-P119-AL12SW-A / 4711475640931

How to use

Mount the ASTRIA 200 cooler on the CPU following the included universal bracket instructions for your socket type (Intel or AMD). Apply a thin, even layer of thermal paste to the CPU heatspreader, position the cooler so the direct-contact heat pipes sit flush against the CPU, and secure the cooler with the supplied screws and backplate. Connect the 4-pin fan power cable to the CPU_FAN or SYS_FAN header and plug the 3-pin/4-pin ARGB cable into a 5V addressable RGB header on your motherboard to enable lighting control through ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light, or ASRock Polychrome.

Recommendations

For optimal performance, ensure your case has adequate intake and exhaust airflow, keep the heatsink and fan free of dust, and verify motherboard ARGB header pinouts before connecting the lighting cable. Use the fan speed control in BIOS or motherboard software to balance cooling and noise according to your workload.