Yikong 4107 PE Crawler Brushless 1/10 Dark Blue

The Yikong 4107 PE is a ready-to-run 1:10 scale 4WD crawler with brushless power, shown here with the body in Dark Blue. It uses the same LCG chassis as the 4107 PRO: a ladder frame with a low-mounted battery tray, portal axles, fully adjustable oil-filled shocks, metal gears and a 2-speed transmission that shifts between high and low while driving. Power comes from the same 2100 kV brushless motor and water-resistant 60 A ESC, with steering handled by a 25 kg digital metal gear servo. On the PE the front and rear differential locks are engaged by hand and there is no tank turn function. LED lighting, bull bar, side steps and a roof rack with light bar are fitted at the factory. Battery and charger are not included.

Key features

• Portal axles front and rear; ladder-frame LCG chassis with low-mounted battery tray
• Front and rear differential locks engaged by hand
• Metal transmission gears, CVD driveshafts and ball bearings throughout
• Fully adjustable oil-filled shock absorbers with aluminium bodies
• Polycarbonate body with simulated interior
• Factory-fitted bull bar, side steps, roof rack with LED light bar and rear jerry can
• 2100 kV brushless motor with water-resistant 60 A ESC
• 2-speed transmission; high and low switchable from the transmitter
• 25 kg digital metal gear servo; front and rear LED lighting switchable from the transmitter

Specifications

• Ground Clearance: approx. 65 mm
• Weight: approx. 3.1 kg
• Motor: brushless 2100 kV
• Differential Locks: front and rear, engaged by hand
• Shock Absorbers: oil-filled, aluminium bodies, adjustable
• Chassis: LCG design
• Lighting: LED front and rear, switchable
• Body: polycarbonate, Dark Blue
• Scale: 1:10
• Drivetrain: 4WD with portal axles
• Wheelbase: 325 mm
• Track width: 267 mm
• Tyres: 116 × 42 mm (crawler tread)
• Dimensions (L × W × H): 521 × 247 × 267 mm
• Steering angle: approx. 40°
• ESC: 60 A brushless, water-resistant
• Servo: 25 kg digital metal gear servo
• Transmission: 2-speed, high and low
• Battery compartment: 156 × 48 mm
• Recommended battery: 3S LiPo 5200–6500 mAh with XT60 (not included)
• Radio system: 2.4 GHz
• In the box: 1× ready-to-run crawler with mounted and painted body, factory-installed motor, ESC, servo and lighting; 1× 2.4 GHz transmitter with receiver; 1× user manual
• Notes: Required: 1 × 3S LiPo battery with XT60 connector to suit the 156 × 48 mm battery tray, 1 × matching charger and 4 × AA batteries for the transmitter.