Adaptador PoE Longshine LCS-P302

The Longshine LCS-P302 PoE adapter provides Gigabit Ethernet connectivity with support for 10/100/1000 Mbit/s data rates and compatibility with IEEE 802.3af and 802.3at power-over-Ethernet standards. Its compact housing (155 x 74 x 36 mm) and 0.365 kg weight make the adapter convenient to place near switches, routers or networked devices. LED indicators show power and PoE status to help monitor operation and troubleshoot basic connectivity issues.

Advantages

The adapter delivers simultaneous data and power over standard Ethernet cabling, simplifying installations by removing the need for separate power supplies at the powered device. Gigabit throughput maintains high data transfer rates for connected devices. Built-in LEDs provide clear visual feedback on power and PoE activity, and the small form factor allows flexible mounting or placement in constrained spaces.

Suitable for

• Powering single PoE-enabled devices such as IP cameras and VoIP phones
• Adding PoE capability to non-PoE switches or network drops
• Small office and home network setups requiring reliable Gigabit links

Key specifications

• Data rates: 10/100/1000 Mbit/s (Gigabit Ethernet)
• PoE standards supported: IEEE 802.3af and IEEE 802.3at
• Ethernet ports: 2 x RJ-45
• Input voltage: 100–240 V AC
• LED indicators: Power and PoE status
• Dimensions: 155 x 74 x 36 mm
• Weight: 0.365 kg
• Colour: Black

How to use

Connect the adapter to an AC outlet and link one RJ-45 port to your network switch or router. Use the second RJ-45 port to supply power and data to a PoE-capable device. Verify LED indicators to confirm that the adapter is powered and delivering PoE. If the connected device requires 802.3at class power, ensure the adapter is connected and configured in the appropriate network environment to provide the required power level.

Recommendations

Use shielded or high-quality Category 5e or Category 6 cabling for optimal Gigabit performance and to minimize power loss over distance. Install the adapter in a dry, ventilated location away from direct heat sources, and check LED status regularly to confirm correct operation. For deployments with multiple PoE devices, verify overall power budget and cable length limitations to ensure consistent device operation.