be quiet! Pure Loop 2 FX 280mm refrigeración líquida todo en uno para procesador 14 cm negro 1 unidad

Impressive illumination, superior cooling
Pure Loop 2 FX 280mm is the impressively high-performing and silent All-in-One water cooling unit with impressive ARGB illumination for slightly overclocked systems. Its black design with ARGB illumination makes Pure Loop 2 FX 280mm a highlight in any case. The newly built PWM pump with increased performance offers a silent operation. Having an included coolant bottle in the scope of delivery, Pure Loop 2 FX 280mm underlines its claim to be the first choice for design-orientated users.

IMPRESSIVELY HIGH COOLING PERFORMANCE
Reliable cooling power for sophisticated applications
With Pure Loop 2 FX 280mm even the most demanding applications can be used reliably. An immense cooling power provides low temperatures even during periods of peak CPU performance. Pure Loop 2 FX 280mm is the water cooling solution of choice for all consumer CPUs.

FANS DEVELOPED FOR RADIATORS
Fan blades optimized for high pressure
With a remarkably high air pressure of up to 2.3mm /H2O, Light Wings 140mm PWM high-speed is the best choice for Pure Loop 2 FX 280mm. The 9 airflow-optimized fan blades provide enough air pressure to make this fan perfect, even in demanding configurations.

IMPRESSIVE ILLUMINATION, NEAT DESIGN
Lots of illumination possibilities
2 Light Wings PWM high-speed offer ARGB lighting at the front and rear. 20 ARGB LEDs give you many opportunities to individualize your PC build. This and the illuminated cooling block make Pure Loop 2 FX 280mm a highlight in any system.

DOUBLY DECOUPLED PWM-PUMP
Adjustable and silent operation
The doubly decoupled PWM-pump runs smoothly and silent. Due to the PWM control the pump speed can be adjusted for silent as well as powerful operations. Thanks to the effective damping the pump causes even less noise and minimal vibration. This is the key to provide the well-known silent be quiet! operation.

ONE HUB, MANY POSSIBILITIES
Synchronization of up to 6 ARGB-components
The ARGB-PWM-Hub enables synchronization of up to 6 PWM fans and 6 ARGB components. This allows the user to run all your cooling and lighting gear with just one PWM and one ARGB header on your motherboard. It can be positioned everywhere inside the case and by that supports a neat interior and cable management.

EASY TO REFILL
For a long lifespan
The refill port is easy to access which makes refilling safe and comfortable. The coolant bottle included in scope of delivery makes it easy to achieve a long lifespan.

How to use

Mount the 280 mm radiator in a compatible case location and install the two 140 mm fans onto the radiator. Connect the pump to a PWM header on the motherboard and attach the ARGB and PWM cables to the ARGB-PWM hub. Connect the hub to one PWM and one ARGB motherboard header to enable control and synchronization. Fill the refill port using the included coolant bottle following the enclosed manual and verify all connections before powering the system.

Recommendations

For quiet operation, configure the pump and fan curves in the motherboard BIOS or fan control software and ensure the radiator is mounted where airflow is unobstructed. Check and top up coolant only when the system is powered off and cooled down.