Bloque de agua para GPU Barrow para ASUS ROG TUF 5080 / 5070 Ti – negro

Barrow GPU water block for ASUS ROG TUF 5080 / 5070 Ti in black is a full-coverage cooling component designed to replace the card's stock cooler and integrate into a custom liquid-cooling loop. It provides direct liquid contact to the GPU die and thermally relevant surrounding components, improving heat transfer away from the graphics processor and memory. The low-profile black finish matches modern build aesthetics while focusing on thermal performance and quiet operation.

Advantages

This Barrow GPU water block lowers GPU and component temperatures more effectively than standard air cooling by enabling continuous liquid heat removal. The block reduces fan noise and allows for more consistent clock speeds during sustained heavy loads. Its full-coverage design cools the GPU core and adjacent VRAM and VRM areas, helping maintain stable operation under extended gaming or workstation workloads. The black finish offers a neutral appearance that fits a wide range of PC builds.

Suitable for

• Custom liquid-cooled gaming PCs using ASUS ROG TUF 5080 or 5070 Ti graphics cards
• Workstation systems requiring lower GPU temperatures and stable performance under long rendering or simulation tasks
• Silent PC builds that aim to reduce fan noise by shifting to liquid cooling
• Modded or showcase systems where full-coverage GPU cooling is desired

Key specifications

• Compatibility: designed for ASUS ROG TUF 5080 and 5070 Ti reference PCB layouts
• Cooling type: full-coverage liquid cooling block for GPU, VRAM and VRM areas
• Material: precision-machined metal coldplate and transparent or black-accent top (black finish)
• Interface: G1/4" threaded fittings for integration into standard custom water-cooling loops
• Thickness and dimensions: low-profile design matched to target card form factor (check physical fit before installation)
• Thermal medium contact: direct coldplate contact with GPU die and thermally conductive pads for adjacent components

How to use

Before installation, power down the system, disconnect cables and remove the graphics card from the motherboard. Carefully remove the stock cooler following the card manufacturer's instructions and clean the GPU die and component contact areas with an appropriate solvent. Position the Barrow water block onto the card, ensuring proper alignment with mounting points and that thermal pads or paste are correctly placed on memory and VRM components. Secure the block with the supplied mounting hardware, connect appropriate G1/4" fittings and tubing to the loop, and perform a leak test with the system powered off. After a successful leak test, reinstall the card, power up the system, and monitor temperatures to confirm proper operation.

Recommendations

Use compatible G1/4" fittings and tubing rated for PC water-cooling systems, and follow the custom loop builder's best practices: run a dedicated leak test before powering the system, use corrosion-inhibiting coolant suitable for mixed-metal loops if applicable, and periodically inspect fittings and coolant condition. Verify physical compatibility with your specific ASUS ROG TUF 5080 or 5070 Ti card revision and case layout before purchase.