BlueOptics BLIS4387-100CM cable SAS 1 m MiniSAS-HD a MiniSAS 6 Gbit/s

The BlueOptics BLIS4387-100CM is a 1 m Serial Attached SCSI (SAS) cable engineered for internal high-speed storage connections. It pairs a MiniSAS-HD (SFF-8643) plug with a MiniSAS (SFF-8087) plug and supports SAS transfer rates up to 6 Gbit/s, with backward compatibility to 3 Gbit/s. Designed for short-range rack and server environments, the cable is passive and intended for reliable links between host controllers, backplanes and storage drives.

Advantages

This 1 m MiniSAS cable provides straightforward, cost-effective connectivity for professional storage installations. As a passive hybrid cable it avoids active electronics, reducing failure points and simplifying compatibility with hardware that supports passive SFF-8643 to SFF-8087 connections. The cable’s compact length and form factor are suitable for dense rack layouts and cable-managed server enclosures.

Suitable for

• Connecting internal SAS host adapters to drive backplanes
• Linking storage enclosures, RAID controllers and HBAs in servers
• Short-range data center cabling and rack-mounted storage systems
• Upgrading or replacing existing 3 Gbit/s or 6 Gbit/s SAS connections

Key specifications

• Length: 1 meter
• Connector types: MiniSAS-HD (SFF-8643) to MiniSAS (SFF-8087)
• Supported protocols/speeds: SAS 3 Gbit/s and 6 Gbit/s
• Cable type: passive MiniSAS hybrid cable
• Typical application: internal server and storage interconnects
• Color: blue
• Package weight approximately 160 g

How to use

Identify the appropriate MiniSAS-HD (SFF-8643) and MiniSAS (SFF-8087) ports on your host controller, HBA or backplane. With the system powered down or following hot-swap guidelines for your hardware, align the keyed connectors and insert firmly until the latch engages. Route the cable to avoid tight bends and interference with airflow in the rack. Confirm link status in the controller firmware or operating system after powering the system on to verify the 3 Gbit/s or 6 Gbit/s connection.

Recommendations

Use this cable for short internal runs within servers or racks. Avoid sustained sharp bends and physical strain on the connectors. Ensure connected hardware supports passive MiniSAS hybrid cabling; check host adapter and backplane documentation for compatibility and recommended installation practices.