Cable de red EFB Elektronik Cat.5e RJ-45 F/UTP 5 m verde

Networking Cable EFB Elektronik Cat.5e RJ-45 F/UTP 5m Green is a 5-meter Cat.5e patch cable with foil-shielded twisted pairs (F/UTP) designed for Gigabit Ethernet (10/100/1000Base-T(X)). The cable uses two shielded Hirose TM11 RJ45 plugs (IEC 60603-7-3) and is coded to TIA/EIA 568B. The cable jacket is low-smoke halogen-free (LSZH) and meets flame retardant and emission standards IEC 60332-1, IEC 60754-2 and IEC 61034.

Advantages

The F/UTP construction with foil shielding reduces electromagnetic interference and crosstalk, supporting more reliable data transmission for network devices. Shielded Hirose TM11 RJ45 plugs provide sturdy, standardized connections compliant with IEC 60603-7-3. The LSZH jacket minimizes toxic gas emissions and smoke in the event of fire, and the cable conforms to common safety and flame retardant standards. TIA/EIA 568B coding ensures compatibility with standard structured cabling installations.

Suitable for

• Connecting switches, routers, PCs and networked devices in offices and homes
• Gigabit Ethernet LAN installations requiring reduced interference
• Structured cabling that follows TIA/EIA 568B wiring

Key specifications

• Cable type: Cat.5e, F/UTP (foil shielded pairs)
• Length: 5 m
• Connectors: 2 × Hirose TM11 RJ45 shielded (IEC 60603-7-3)
• Coding: TIA/EIA 568B
• Performance: 1 Gigabit Ethernet (10/100/1000Base-T(X)), 100 MHz
• Conductor: 4 × 2 × AWG26/7
• Outer diameter: Ø 5.4 mm
• Jacket: LSZH (halogen-free, low smoke)
• Safety standards: Flame retardant IEC 60332-1; halogen-free IEC 60754-2; low smoke IEC 61034

How to use

Plug each RJ-45 connector into the corresponding Ethernet port on your network devices, observing the TIA/EIA 568B wiring if connecting to structured panels. Ensure both ends are fully inserted into the ports until the connector seats. Avoid tight bends with radius smaller than the cable diameter and do not pinch or sharply kink the cable to preserve signal integrity. The cable includes a mounted strain relief boot to reduce mechanical stress at the connector.

Recommendations

For optimal performance, use this Cat.5e F/UTP cable in environments where electromagnetic interference may affect unshielded cables; maintain proper bend radius and avoid running the cable parallel to high-voltage power lines.