Cable DisplayPort a HDMI PureLink PI5100 5 m

Certified Active 2K DisplayPort / HDMI Cable – 5.00 m. The PureLink PI5100 is a 5-metre DisplayPort to HDMI cable designed for reliable video and audio transmission in professional AV installations. It provides a DisplayPort 1.1 to HDMI 1.4 connection supporting resolutions up to WUXGA (1920x1200) and is built with high-purity tinned OFC copper conductors, triple shielding and gold-plated precision contacts with PureLink SLS™ (Secure-Lock-System™).

Advantages

The cable supports DP 1.1 / HDMI 1.4 for resolutions up to WUXGA (1920x1200). Gold-plated precision contacts with PureLink SLS™ ensure secure mating and reliable signal transfer. Construction includes high-purity tinned OFC copper conductors (AWG28) and triple shielding to reduce interference, and every cable is 100% tested for professional AV applications.

Suitable for

• Connecting a DisplayPort source (e.g., PC or laptop) to an HDMI display or projector
• Professional AV installations requiring tested and shielded video cabling
• Setups where secure mechanical connection (Secure-Lock-System™) is needed

Key specifications

• Length: 5.00 m
• Interfaces: DisplayPort (male) to HDMI-A (male)
• Standards: DisplayPort 1.1, HDMI 1.4
• Maximum resolution supported: up to WUXGA / 1920x1200
• Conductors: high-purity tinned OFC copper, AWG28
• Shielding: triple shielding
• Contacts: gold-plated with PureLink SLS™ (Secure-Lock-System™)
• Quality: 100% tested for professional AV applications

How to use

Connect the DisplayPort male plug to the DisplayPort output of your source device and the HDMI-A male plug to the HDMI input of the display or projector. Ensure both devices are powered and set the display input to the corresponding HDMI port. The cable is plug-and-play and does not require additional drivers; for optimal results, configure the output resolution on the source device to match or be below 1920x1200.

Recommendations

For reliable performance in professional installations, route the cable away from strong electromagnetic interference sources, avoid tight bends, and secure connectors using the PureLink Secure-Lock-System™ where available. Verify display settings on the source device to ensure output does not exceed the supported resolution.