Cable DisplayPort HDMI Kramer Electronics C-DPM/HM/UHD-10 3 m

The Kramer C−DPM/HM/UHD-10 is a 3 m active DisplayPort-to-HDMI cable that connects DisplayPort-equipped PCs or laptops to HDMI Type A displays without additional adapters. It performs true signal conversion when the source does not support DP++ and works with both DisplayPort single-mode and dual-mode outputs, supporting video resolutions up to 4K@60Hz (4:4:4) and HDCP 2.2 for protected content.

Advantages

This active DisplayPort to HDMI cable provides reliable conversion for sources lacking DP++, supports full 4K@60Hz (4:4:4) video and HDCP 2.2 compliance, and integrates audio and video transmission in a single durable 3 m cable. The cable is plug-and-play, eliminating the need for separate converters or adapters while maintaining signal integrity for professional and consumer A/V setups.

Suitable for

• Connecting DisplayPort PCs or laptops to HDMI monitors, TVs or projectors
• Professional AV installations requiring 4K@60Hz (4:4:4)
• Home entertainment systems and conference rooms with HDMI displays

Key specifications

• Brand: Kramer Electronics
• Model / MPN: C-DPM/HM/UHD-10 / 97-0611010
• Length: 3 m
• Connectors: DisplayPort (source) to HDMI Type A (display)
• Maximum resolution: up to 4K@60Hz (4:4:4)
• HDCP: 2.2
• EAN: 7291063086343

How to use

Connect the DisplayPort end to the source device (PC or laptop) and the HDMI Type A end to the display (monitor, TV or projector). The active cable performs the necessary signal conversion automatically; ensure the source and display are powered on and set to the correct input. No external power or additional adapters are required for normal operation.

Recommendations

For best results, use with devices that support HDMI input at the desired resolution and ensure display firmware is up to date. Avoid sharp bends and excessive tension along the 3 m cable to preserve connector and conductor integrity.