Cable DMX XLR de 3 pines PSSO 1,5 m con conectores Neutrik

PSSO XLR 3-pin DMX cable 1.5 m with Neutrik connectors is a balanced XLR cable designed for transmitting audio and DMX512 control signals over short runs. At 1.5 m length it offers a compact, robust connection suitable for stage, studio and installation use where reliable data transfer and a secure mechanical fit are required. The cable uses a standard 3-pin XLR wiring and Neutrik-compatible connectors to ensure firm contact and durable performance in pro audio and lighting setups.

Advantages

The cable provides stable DMX and audio signal transmission thanks to its balanced construction and solid connector contacts. Neutrik-compatible connectors deliver secure locking and good mechanical retention while the short 1.5 m length reduces signal degradation and clutter in patching and stagebox situations. Its build is aimed at frequent use in live and production environments, offering consistent performance for control consoles, fixtures and dimmers.

Suitable for

Key specifications

How to use

Connect the male XLR end to the DMX output or audio output on a console or other source device and the female end to the lighting fixture, dimmer pack or receiving device. Ensure connectors are fully seated and locked to prevent accidental disconnection. For DMX chains, follow the correct daisy-chain topology and termination practices for reliable operation: place the cable in line with the other DMX runs and add a termination resistor at the end of the line if required by your DMX hardware.

Recommendations

Use this short PSSO XLR DMX cable for patching nearby devices to keep runs tidy and minimize potential interference. Avoid sharp bends and excessive strain at the connector ends, and inspect connector pins and locking mechanisms regularly to maintain reliable connections in live and studio environments.