Cable HDMI DeLOCK 85147 0,25 m Type-A a Type-D blanco

This High Quality High Speed HDMI with Ethernet cable by Delock enables the connection between a camera or tablet with Micro HDMI interface and a monitor or TV with an HDMI-A port. The DeLOCK 85147 features a compact 0.25 m white cable with HDMI Type D (Micro) and HDMI Type A (Standard) connectors, gold-plated contacts and triple shielding for reliable signal transmission. It supports up to 18 Gbit/s bandwidth, 4K at 60 Hz, 4K 3D at 24 Hz, 21:9 aspect ratio content, ARC and enhanced audio sampling rates.

Advantages

The cable's slim diameter and short connectors reduce strain on device ports and save space in tight setups. Triple shielding and gold-plated contacts ensure stable data, audio and video transfer with reduced interference. Support for 18 Gbit/s bandwidth and advanced audio sampling (up to 1536 kHz) enables high-resolution video and improved audio quality. Built-in Ethernet and Audio Return Channel expand connectivity options between source devices and displays.

Suitable for

• Connecting cameras or tablets with Micro HDMI (Type D) to TVs or monitors with HDMI-A (Type A)
• Transmitting 4K video at up to 60 Hz and 4K 3D at up to 24 Hz
• Setups requiring ARC or Ethernet over HDMI
• Short-distance connections where a compact 0.25 m cable is needed

Key specifications

• Manufacturer: DELOCK, model 85147
• Length: 0.25 m
• Connectors: HDMI Type A (Standard) to HDMI Type D (Micro)
• Maximum bandwidth: 18 Gbit/s
• Maximum resolution: 3840 x 2160 (4K) at 60 Hz
• 3D 4K support: up to 24 Hz
• Audio sampling rate: up to 1536 kHz
• Features: Ethernet, Audio Return Channel (ARC)
• Colour: White
• Contacts: gold-plated

How to use

Connect the Micro HDMI (Type D) end to the camera or tablet Micro HDMI port and plug the HDMI Type A end into the monitor or TV HDMI input. Ensure both devices are powered on and set the display input to the corresponding HDMI port. For audio return or Ethernet functionality, enable ARC or HDMI Ethernet Channel settings on the connected devices if required. Avoid sharp bends near the connectors to maintain cable integrity.

Recommendations

Use this 0.25 m cable for short, direct connections between a camera or portable device and a nearby display. Do not use as a replacement for long-distance runs; for longer distances choose a cable rated for the required length and bandwidth. Store the cable coiled without tight kinks and disconnect by holding the connector body rather than pulling the cable.